Where to find 2.0 tip paint spray guns for primer??

[sixpack_sid]

Hi,
I am doing body work on my Charger and looked thru the archives to see how to get rid of the pinholes from putty and small pitting in the engine bay. I saw a post where someone said to use Slick Sand primer with a 2.0 or 2.2 tip. I'm having trouble finding any guns with tips that big. Anyone know where I can find them? I have a Central Pneumatic gun-but can only find a 1.8 tip for it. I would be willing to buy a new gun if they have a tip that size.
Thanks,
Sid

[FLG]

Where are you located? Think i remember it was PA..but not sure. Im in Brooklyn NY.


I have a 2.2 or 2.3 tipped gun (cant remember) that i used to spray slick sand. Im not using it again for a bit and id let you borrow it.

[69*F5*SE]

I have a 2.2 or 2.3 tipped gun (cant remember) that i used to spray slick sand. Im not using it again for a bit and id let you borrow it.

Talk about a friendly gesture.  Kudo's 

[sixpack_sid]

Where are you located? Think i remember it was PA..but not sure. Im in Brooklyn NY.


I have a 2.2 or 2.3 tipped gun (cant remember) that i used to spray slick sand. Im not using it again for a bit and id let you borrow it.

Thanks for the offer, but I'd rather buy one. I plan on doing a lot of body work, probably won't be shooting everything at once.

[FLG]

No prob. Ill check the manufacture and let ya know, I got it through snap on.

Mind you, it will prob be months before I have time to start working on anything again so its not like I'm going to need it back in a week.

[jaak]

I bought a cheep gun off eBay, just to use for poly-primer....I bought the cheapest gun I could find with a 2.0 tip, it was like $20 bucks With shipping (new!). I cant remember the name on it but its got "W-71" on the side of it. Works good for priming. Slicksand is very thick though...I would suggest using a 2.2 tip, even with my 2.0, I gotta thin slicksand about 10% to get it to spray good.

Jason

[Silver R/T]

There you go
http://cgi.ebay.com/ebaymotors/Pro-2-0-mm-HVLP-SPRAY-GUN-Auto-Paint-Primer-Prime-Car-_W0QQcmdZViewItemQQhashZitem335c7a22f5QQitemZ220594840309QQptZMotorsQ5fAutomotiveQ5fTools
Good gun, comes with regulator and I can personally attest to sellers feedback as I've bought multiple items from him

[hemi-hampton]

They even got a 2.5. I could use a new primer gun myself. LEON.


http://cgi.ebay.com/ebaymotors/Pro-2-5mm-HVLP-SPRAY-GUN-Auto-Paint-Primer-Metal-Flake-/190393902967?cmd=ViewItem&pt=Motors_Automotive_Tools&hash=item2c545c6777

[FLG]

This is the gun I have

http://www.northerntool.com/shop/tools/product_200355935_200355935

[AdamMopar]

I would recommend looking at the Devilbiss III primer gun.  It is a good gun for the price. and you can get setup with the right size tips for shooting epoxy, 2k urethane, and polyester primers. It isn't the most efficient from an air comsumption standpoint, but probably no worse than the Central Pneumatic gun.

[sixpack_sid]

Thanks for all the good advice! I ordered the 2.5 gun that hemi-hampton found. Thanks for the recommendation Silver R/T.
Sid

[Silver R/T]

no problem, glad to help out fellow Charger owner