Looking for advice on a camshaft

[cpthowdy1369]

Hey guys, I'm about to buy a camshaft for my 383 :icon_smile_big:but I dont really know what size to get .  I'm looking to make the Charger streetable with a sweet choppy muscle idle that will force you back in your seat when you hit the gas to dust the hamstermobile next to me at the light.  I've got a 750 carb, headers, a 2800 stall converter and an 3.23/8 3/4 rear.  I don't have a sure grip yet but plan on installing one.  I was thinking of getting one of those voodoo camshafts( 276/284).  Would that work?   I appreciate your help guys.

[flyinlow]

440 ?

I have the Lunati 60303 in my 446/10.5 c.r. /3.55/ headers/EDDY heads/ RPM intake 800 cfm carb/ A518 trans.

Works well. Lives with an automatic trans,power brakes and some city traffic. Idles at 900 rpm in park. About 700 in gear , slightly rough, you can hear its not a stock cam. If I had the OD trans when I built the engine I think I would have used one notch smaller cam. The Lunati 60302.

[firefighter3931]

The Comp XE268H is a good choice with 2800 stall and 3.23 gears. 

If available an Engle k56 hydraulic will also do the trick. 



Ron

[Nacho-RT74]

it looks ENGLE ppl have new grinds and they look more simmilar to MP ones than the last year ones

[cpthowdy1369]

all of the comp cams I an find are for chevies and fords.  Do you know where I can find one for for my Charger?

[cpthowdy1369]

nevermind   found them.    Thanks guys.

[TUFCAT]

Based on Ron's recommendations I just ordered this Crower cam for my (slightly warmed over) stock looking 383/727 build with 3.23 gears.

[firefighter3931]

Based on Ron's recommendations I just ordered this Crower cam for my (slightly warmed over) stock looking 383/727 build with 3.23 gears.

Yep, the HDP 271 Crower is another good choice. The Comp has a little more duration which would work good with your increased stall speed.


Ron

[cpthowdy1369]

would it also give me the choppy idle and launch that I'm looking for?

[Nacho-RT74]

does somebody know what happened with "old" engle grinds ?