What parts would you like to see re popped?

[b5blue]

Hey you guys I was just thinking of all the parts for my 70 Charger that have become available in the 15 years since I bought it. Some though rather pricey I never thought I'd see again. What would you like to see for your Mopar? Maybe someone will see a need and make them for us! 

[clanton]

Lower dash pads, the hood latch striker panel. top cowl patch panel, or the whole cowl.

[E5 Charger]

Full quarter panels and a bulge hood for a 74.

[mauve66]

fiberglass tilt front end
1st gen door panels
1st gen headliners

[Hemidog]

Lower dash pads, the hood latch striker panel. top cowl patch panel, or the whole cowl.

http://www.autometaldirect.com/ShowItem/100996%2066-70%20B-Body%20Upper%20Cowl.aspx

AND BE&A says lower dash pads are in the works!

[clanton]

Hes been saying that for over a year....

[tan top]

second generation grills  &  69/ 70  tail lamps
six way seat frame&  brackets ,
second generation fuel filler tubes 

[694spdRT]

Truthfully, I can't believe how much is available now compared to about 5 or 10 years ago.

[tan top]

Truthfully, I can't believe how much is available now compared to about 5 or 10 years ago.

yes me too , makes me wish i restored mine  now  not 10 years back with a few things ,  think what it was like back in the late eightys ,  although hemmings were full of parts & cars cheep then  

[SFRT]

lower dash pads for 69 chargers.

a decent set of backlight trim that fits for 69 chargers

inside trunk rear light cover

a modernized door handle latch/lock unit that fits into the stock area.

[Sublime/Sixpack]

Front fenders for '70 Charger (just in case).

[Daytona R/T SE]

Front fenders for '70 Charger (just in case).

  X2

[squeakfinder]

  A question like this was asked on moparstyle a few years ago. I said full oem quarter panels and fenders for second generation Charger's. Most of that wish came true  .

  Now there's still an issue about grille's isn't there?

[Mike DC]

   

The unibody. 

[71green go]

Front fenders for the 71 charger........

[mikesbbody]

Full quarter panels and a bulge hood for a 74.

AMD already do full quarter's for 71-74 Charger's as for the Hood though yeah, that would be nice huh? I wish they would do fenders for 71's just like Greengo said.

[vancamp]

grilles for all year chargers

[E5 Charger]

Mikesbbody, I don't see the 73-74 full quarters on the AMD website. Just for 71 or 72, which is not the same as the 74. Are they coming out with them?

[RD]

71/72 ramcharger bulge hoods for the charger.

[jaak]

3rd gen deck lids....had a 72 and now a 73, that's the only part with significant rust on both cars.
Unless AMD is making 'em yet...

Jason

[FlatbackFanatic]

full quarter panels for 1st gens.

[devilgear]

3rd gen power bulge steel hood...The Super Bee hood would be great. Also all 3rd gen grills including the hideaway...

[Als73charger]

  Front fenders for 73-74
  Trunk lids

[NorwayCharger]

Lower dash pads, the hood latch striker panel. top cowl patch panel, or the whole cowl.

http://www.autometaldirect.com/ShowItem/100996%2066-70%20B-Body%20Upper%20Cowl.aspx

http://www.autometaldirect.com/ShowItem/103112%2066-70%20B%20Body%20Upper%20Cowl%20Plenum.aspx

[mikesbbody]

Mikesbbody, I don't see the 73-74 full quarters on the AMD website. Just for 71 or 72, which is not the same as the 74. Are they coming out with them?

I could be wrong when I said AMD or it could be that they are not on their website yet I know they are selling them on E.B let me get back to you.
ok  below is the link I can't recall if I saw FULL quarters, or just these lowers but...I could have sworn I have seen full ones somewhere...
http://cgi.ebay.com/ebaymotors/1973-1974-Dodge-Charger-LH-Quarter-Panel-Skin_W0QQcmdZViewItemQQhashZitem1c118048baQQitemZ120552704186QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[Belgium R/T -68]

Door and quarterbeltmoldings!!!!!!!!!!!

Per

[Tilar]

  Front fenders for 73-74
  Trunk lids

I found a pair of front fenders that need work but the guy wants $350 a piece for them. Supposedly no rust but they have a few "dings" according the the guy. Sounds a little rich to me.

[noff57]

73-74 fenders 

[GunMetal]

Headlight Bezels for '71 - '74! I'd even settle for stamped Aluminum.

[Musicman]

Rocker Trim for 66-67 Charger/Coronet

[b5blue]

Pickings are slim for 1st gen. I see! 

[Musicman]

Well, it's a lot better than it was... even up to a year ago... but's there's still a good deal of missing items yet to be produced.

[b5blue]

I know what you mean, I never thought anyone would re pop 2nd gen defroster vents much less the new cowl piece!   

[200MPH]

Rear tailight surround/trim for 1970 

[b5blue]

Yup! What would it be worth? (350.00?)

[Nacho-RT74]

This topic has been posted couple of times now in the past...

I'm surprised nobody have mentioned about the ALLWAYS WISHED AND REQUIRED 73/74 RUBBER BUMPER FILLERS! and grilles headlight fillers

has been allways mentioned... once more won't hurt, specially because won't change anything anyway

[Dodgecharger74]

times 2

[b5blue]

You never know!

[hemi-hampton]

Front fenders for '70 Charger (just in case).

  X2

X3
    LEON.

[Darkman]

Do they do firewalls? If not, that's what I would like to see. Can't seem to find any

[motorcitydak]

I want to see everything available to make a completely brand new gen 2 Charger. We are close, just not quite there yet

[six-tee-nine]

Although I have a perfectly mint grille laying to go onto my 69 I'd say grille parts.....

And is anyone repopping 69 taillight lenses already? since I can't get mine polished perfectly and I'm not going to pay alot of money on Ebay for a set of "perfect NOS ones" that look worse when they arrive (everyone knows that feeling  )

[greenpigs]

I would like to see aluminum fenders,doors,hood for 2nd gens.

[motorcitydak]

I would like to see aluminum fenders,doors,hood for 2nd gens.

Agreed, I want light weight parts for my car..cough CHRIS!!cough. I already have fiberglass fenders (soon to be 2 pairs) and a fiberglass lift off 6 pack hood. I know VFN makes the doors but I am more worried about having functional door handles, locks and windows than I am about shaving 50# from those areas

[b5blue]

You guys have great ideas! 

[SFRT]

aluminum parts would be THE SHIT..especially a hood with a SCOOP.

I got my money right here. bring it ON

[Ghoste]

Body panels for 1st gens including floor pans (esp. trunk  ) and interior panels for 1st gens as well.

[troy.70R/T]

The inner shifter boot used on 4-speed console cars.