511" stroker by Best Machine

[Jderek]

511" stroker kit (440 block) with 10.7:1 compression
4.375 bore, 4.25 stroke
Eagle crankshaft
Diamond 13cc dished pistons
custom Comp Cam 245/257@110 .535/.542 lift with 1.5 Comp Cams Pro Magnum Rockers
Mopar aluminum straight plug design heads (Edelbrock Performer RPM's) with stage I port job by Porter Racing
flowing 280cfm @.600 lift
MSD ignition
Quick Fuel 850 cfm carb with 1/2" spacer
Holley Street Dominator intake
Melling oil pump
Milodon high volume water pump
Mlodon 7qt oil pan
ARP accessories

The build made 10 inches of vacuum @ idle (900rpm)
Using 93 octane...

Horsepower: 609hp @5400 rpm
Torque: 688 @4200 rpm

Can't wait to get it in the car!

[tan top]

  

[firefighter3931]

Very nice Justen ! 

That's gonna be an absolute blast in the car !! 

Here are the dyno results & engine pic....impressive 



Ron

[Jderek]

Ron, thanks for posting and your recommendations! Justen

[BSB67]

Nice. 

[Brightyellow69rtse]

i now feel inadequate.

[dstryr]

Nice, is that going into the Charger in your avatar pic?

[Jderek]

Nice, is that going into the Charger in your avatar pic?

Yes, am installing the motor in the next week or two.  Can't wait!

[tan top]

 653 foot pounds at 35  hundred     

[Challenger340]

Flat Tappet Cam ?

Nice numbers !

[Jderek]

Flat Tappet Cam ?

Nice numbers !

Yes, flat tappet cam...and thanks