Window sweepers

[Belgium R/T -68]

Did I made a mistake by mounting the doorglassassy before I mounted the inner windowsweeper? I don't see how I could
ever get that one mounted now, any thoughts?

And then the one for the quarterglass, it's fastened to the upper doorpad with staples originally but how do you do it when you replace them? Glue??

Per

[Back N Black]

I detatched the glass and let it drop to the bottom of the door. The door inside wiskers has a chrome piece attached and the upper pad slips underneat when attaching the upper pad. For the rear wiskers i used pop rivets to attach to the pad.

[Belgium R/T -68]

I detatched the glass and let it drop to the bottom of the door. The door inside wiskers has a chrome piece attached and the upper pad slips underneat when attaching the upper pad. For the rear wiskers i used pop rivets to attach to the pad.

Thanks Does it matter if the front upperpads goes on before or after the wisker?

Per

[Back N Black]

No it doesn't matter, should work either way.

[6d9 charger]

For the rear interior pad sweepers , i used  a heavy duty marine adhesive  made by 3m   it is called 5200 .  it   worked great . i have used it in the past on other things and it is impossible to break the bond . wood metal , plastic.  etc..    i used a bunch of metal clips from a stationary store  to hold it in place until it set up .