Fits inside the door but what is it for?

[Belgium R/T -68]

Have 2 smaller ones aswell but will come back with pictures of those ones.

Per

[b5blue]

WTF? My door panels are off and I see nothing that looks like that?   

[tan top]

WTF? My door panels are off and I see nothing that looks like that?   

  nothing it like that in a 69 door ! unless its something extra for power windows 

[billschroeder5842]

I don't remember seeing anything like that in my car.

[Back N Black]

Pretty sure its the bracket that prevents the window from going up too far.On the curved piece on the end there should be what looks like a rubber band.

[gasoline_24]

That is correct.  You can use a piece of rubber hose to replace the bumper piece.  This is the upstop on my 68, but I have power windows.

[Belgium R/T -68]

Thanks guys, thought so although my window can pass up and down without touching it.  Second picture shows it installed,
first picture shows the 2 pieces I can't figure out where to place.

Per

[tan top]

Thanks guys, thought so although my window can pass up and down without touching it.  Second picture shows it installed,
first picture shows the 2 pieces I can't figure out where to place.

Per

hmm intresting  , that part in the bottom picture deffo was not in mine & had previously never been apart 
top
picture

they are rear side glass up stops , should have rubber around the ends ,

look at green arrow  , bolt 1 &  bolt  12 @ 11 , ignore green circles , was showing something else to another charger buddy

[Belgium R/T -68]

Great.

Per

[gasoline_24]

You have it installed upside down in the second pic.  The part sticking out goes on the top and catches on the regulator arm to keep it from going up.

[b5blue]

So your green beast has POWER WINDOWS too! (How nice!)   

[Belgium R/T -68]

You have it installed upside down in the second pic.  The part sticking out goes on the top and catches on the regulator arm to keep it from going up.

Thanks for the input.

Per

[Belgium R/T -68]

So your green beast has POWER WINDOWS too! (How nice!)   

I'm not that lucky Neal.

Per

[b5blue]

Per, it is still A-1 in my book!! 

[RAC95054]

Thanks guys, thought so although my window can pass up and down without touching it.  Second picture shows it installed,
first picture shows the 2 pieces I can't figure out where to place.

Per

hmm intresting  , that part in the bottom picture deffo was not in mine & had previously never been apart 
top
picture

they are rear side glass up stops , should have rubber around the ends ,

look at green arrow  , bolt 1 &  bolt  12 @ 11 , ignore green circles , was showing something else to another charger buddy

I was working on my window over the weekend (have a couple of broken rollers in the rear quarter window I needed to fix), and found that the rubber ends of the stops had decayed and fallen off.  Does anyone reproduce those, or does anyone know of a good solution (besides a rubber band that will rot off after a year or two)?

[b5blue]

Cooling system hose. 

[fy469rtse]

Per for window rollers , they are availiable from a few sources, rt specialitys to name one ,
i think they also have the bump stops for those brkts in photo's

[RAC95054]

Thanks for the info guys.  R/T Specialties would seem like a good canididate to have this, but I checked all over their site and didn't find it.  I will contact them and ask.

Thanks again!

[HeavyFuel]

Thanks guys, thought so although my window can pass up and down without touching it.  Second picture shows it installed,
first picture shows the 2 pieces I can't figure out where to place.

Per

hmm intresting  , that part in the bottom picture deffo was not in mine & had previously never been apart  
top
picture

they are rear side glass up stops , should have rubber around the ends ,

look at green arrow  , bolt 1 &  bolt  12 @ 11 , ignore green circles , was showing something else to another charger buddy

I was working on my window over the weekend (have a couple of broken rollers in the rear quarter window I needed to fix), and found that the rubber ends of the stops had decayed and fallen off.  Does anyone reproduce those, or does anyone know of a good solution (besides a rubber band that will rot off after a year or two)?

I used a few of rubber o-rings (per stop), nice and snug.   Then I dunked it in rubber Plasti-Dip a couple times.   Worked dandy, and won't come off.

[ACUDANUT]

Thanks for the info guys.  R/T Specialties would seem like a good canididate to have this, but I checked all over their site and didn't find it.  I will contact them and ask.

Thanks again!

Let us know how long it took for  R/T Specialties to get back with you. 

[bill440rt]

I see this thread is old, but that's a window stop, '68 only.
In '69 - '70 the stop was integral with the run channel & used that plastic rivet in the glass as a stop. 

[RAC95054]

Thanks for the info guys.  R/T Specialties would seem like a good canididate to have this, but I checked all over their site and didn't find it.  I will contact them and ask.

Thanks again!

Let us know how long it took for  R/T Specialties to get back with you. 

Ha!  Good one.  I did actually get through to them, and they said they don't have anything.  I'm actually surprised, since this is a pretty common item among all the cars, and it eventually rots or wears down.