News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

What do you all think of these wheels?

Started by BubBABFP, April 07, 2010, 06:49:20 PM

Previous topic - Next topic

BubBABFP

Hey guys I have been doing some research on wheels. I originally wanted to go with a touring look but I am not decided yet. I have found some cool and inexpensive wheels that are growing on me but the specs are making me paranoid. I am only concerned about the rears because that's the one that makes the look I am going for.

Here is the wheel. http://www.summitracing.com/parts/USW-84-5012L/

specs are 15 by 10
BS is 4", i am concerned since most run a 5.5 and i like the look of it. I don't want my wheel to be to far in.
off set is -38mm. I dont know how offset affects position on wheel but I know some go with 0mm

so my question is with the offset being -38mm and BS 4" would these look nice and not to deep inside the wheel well or even actually stick out?

I want to run a BFG 295/50/15 12.2 section width or the nitto 555r 325/50/15 with 13" section width. do you all think they will fit good?

Noob at wheels measurements but, learning

HPP

With 4" backspace you are going to have the tires hitting the wheel opening lip, so they will stick OUT too far rather than in too far.