Tire question on Cragars

[451-74Charger]

Just Bought a set of 4 15x10 Cragars for my Charger.
What tire would fit the arches without binding, or did I go too wide?

[Nacho-RT74]

I think too wide in front depending on tires height and backspacing... rear, needs to consider the backspacing... I think the deeper it was not more than 4 1/4". Or it was 4 1/2" ?... will need to search the thread about. Was already measured

[HPP]

I don't think 10" is too wide, but I do believe the backspace on the cragars is going to mess with ya. Your going to need something around 5 to 5.25 in back to make them fit right and those cragars only come with 4.25 or 4.5. I don't think you can get those 10" rims under the front at all with that backspace.

[Smokey Bear]

If you are running a 73-74 with the higher cut fender the 10's just might work in front with a low profile tire. They will definitely not clear the fender lip, but if the car is high enough and tire low enough, it might work for that "Hotwheels" look. The 10's wont work out back except with the same reasoning.