Petronix ignition question

[rp23g7]

It wouldnt let me edit my previous post.

Probably a dumb question.

In the instructions for use without a ballast it states:

blah blah blah, Remove the resistor and splice the disconnected wires together at a single point.

Do they mean splice the brown ignition wire and run it to the coil, or

splice both wires on the right hand side of the ballast,  the blue and the brown, then run them to the coil seperatley?

What do you do with the black wire on the left side of the ballast?

[charger_mike75]

I put mine on my charger and left the ballast in place, runs just fine.

[Chryco Psycho]

make sure the pertronics red wire is run to a 12 V source usually the dark blue wre at the ballast