Body Work for $1600

[TXcharger70]

I got a quote from a guy to do the body work on the charger for $1600 he will even fix some of the rust damage that i have not got around to fix yet and have it ready for paint i believe. He will then also paint it for me for about 300 but i supply the paint i think.  Is this pretty good to have the body work and paint for at total of lets just say $2500 on the safe side?

[Tilar]

Hard to tell without pics of what all needs done but that sounds like a pretty fair deal to me.

[Troy]

Have you seen examples of his work before? How much block sanding is involved here? What are your expectations of the finished product? Is this just the exterior or the whole car? I'd say it sounds reasonably cheap - especially if the results are really nice.

Troy

[TylerCharger69]

I dunno....that seems cheap to me....Pictures would help in giving you a rock-solid answer.  And...as what was stated previously...it all depends on what your expectations are for the car.

[68coronetGLwannabe]

I had all the bodywork,paint and airbrush done on my 70 for $1600.00 and my 69 for $2G. They were both what I would consider nice driver quality. (I no longer have the 70). If you want more than that you might have to spend some more $.  

[hemi-hampton]

All depends on what kind of quality you are expecting? Sounds cheap to me. LEON.

[Silver R/T]

which paint brand you'll be using?

[speedfreak68]

Sounds way too cheap to me...sometimes materials can cost that much...

[TylerCharger69]

I dunno...for my expectations...i would say around $5,000

[Patronus]

I dunno...for my expectations...i would say around $5,000

meant to agree w/ speedfreak, that seems pretty cheap

[adauto]

..... you get what you pay for........ 

[RCKSTR]

How much bondo will he be spreading for $1600? Sounds way too cheap.. Like dropping the car off at a maaco....

[TylerCharger69]

lol....i was thinking Earl Shieb's....lol

[Silver R/T]

How much bondo will he be spreading for $1600? Sounds way too cheap.. Like dropping the car off at a maaco....

Bondo ain't cheap either. A gallon of good body filler will set you back $50. Of course you can get cheap crap they sell at parts stores that actually is "Bondo" for under $15

[twodko]

Red flag!



Tom

[y3chargerrt]

You will probably end up with a car that looks ok from 10 feet but will probably start to bubble up pretty quickly. If you expect show quality work you WILL be dispointed.  If you understand your the car will have to be redone in the future then you may be happy.  Just my 

[elitecustombody]

QFT!

..... you get what you pay for........ 

[jaak]

Sounds way too cheap to me...sometimes materials can cost that much...

I think he said he had to supply the materials, I think the 1600 is labor.


BTW Paint materials are EXPENSIVE, I checked on a gallon of J6 SS Urethane , Nason brand (Duponts Cheaper line), and its $262 a gallon, just for the paint. Activator is $45 a quart, and reducer is $25/gallon. I'm sure its double (or more) that for a top of the line like Glasurit, PPG or Dupont.

Jason

[bull]

$1,600? Is that the cover charge?

[BB1]

I had my Charger prepped and painted for $1600. in 1986 

I would run.

[TXcharger70]

This is just to do some of the body work and fix some of the rusted areas quarter panel, Window trim, sail panel. I will have to buy the paint when it gets close to paint it.

[TylerCharger69]

That STILL  sounds kinda cheap to me....the body work is what makes a good paint job...If the prep isn't worth a crap, then either will be the paint job.....

[elitecustombody]

posting pics of the car and problem areas would help

[TXcharger70]

I went to his shop last weekend to see his work and I was really surprised he does really good work and doesn't really use bondo unless he absolutely has to. Needless to say i felt really good about his work and i guess that is the the most important. I saw some of the cars he is working on it really good

[TylerCharger69]

well....bondo sucks....there are other types of fillers that should be used....I like polyester myself as far as skim coats.  You are talking about rusted areas in the quarter, sail panel and window trim.   How much of that area needs to be removed to totally get rid of the rust?  Just by those issues alone  is I'd say around 1600 bucks....Show us some pics, and we can give you a more accurate opinion.  Without seeing it.....we can't really give you an honest answer