68-70 vs 73 rears

[Crazy440]

What's the differance between 70 8 3/4s and 73 8 3/4s?  I'm talking flange to flange, leaf spring center line to center line and center line of axle shaft to center line of rear u-jont.  Wondering if a 70 b 8 3/4 will fit a 73 Charger?

[John_Kunkel]

                 
                 Mopar 8 3/4" Rear End Dimensions

.................................................................               
.................................................................

8 3/4" axle shaft lengths measured from the tip of the splined end
to the outside of the flange:

A BODY
'66-'72= 27 11/16"
(BBC conversion= 28")

B BODY
'65-'67= 28 7/8"
'68-'70= 29 3/16"
'71-'74= 30 5/8"
'71-'73 wagon= 31 21/64"

C BODY
'65-'69= 30"
'70-'71= 30 5/8" (Chrysler & Fury)
'70-'73= 31 21/64" (and '69 wagon)


IMPERIAL (Large Bolt Pattern)
'65-'66= 30 1/8"
'67-'69= 30 5/16"
'70-'71= 29"
'72-'73= 31 7/16"

E BODY
'70-'74= 29 31/32"

A100
'65-'70= 30"

D100
'65-'71= 31 1/8"
'72-'74= 31 21/64

............................................................
............................................................

Housing widths, flange to flange

A BODY
'66-'72= 52 5/8"

B BODY
'62-'63= 53 1/4" (And '64 Max Wedge)
'64    = 55 5/8" (Exc. Max Wedge)
'65-'67= 54 1/4"
'68-'70= 54 15/16"
'71-'74= 57 7/8"
'71-'73 wagon= 59 7/16"

C BODY
'65-'69= 56 3/4"
'70-'71= 57 7/8" (Chrysler & Fury)
'70-'74= 59 7/16" (and '69 wagon)

IMPERIAL
'65-'66= 57"
'67-'69= 57 3/8"
'70-'71= 54 3/4"
'72-'73= 59 5/8"

E BODY
'70-'74= 56 31/64"

A100
'65-'70= 56 3/4"

D100
'65-'71= 58 5/16"
'72-'74= 59 7/16"

...........................................................
...........................................................

Rear end widths, drum-to-drum:

A BODY
'66-'72= 57 1/8"

B BODY
'62-'63= 58 1/2" (And '64 Max Wedge)
'64    = 60 7/8" (Exc.Max Wedge)
'65-'67= 59 1/2"
'68-'70= 60 1/8"
'71-'74= 63"
'71-'73 wagon= 64 3/8"

C BODY

'65-'69= 61.75"
'70-'71= 63.0" (Chrysler & Fury)
'70-'73= 64 3/8" (and '69 wagon)

IMPERIAL
'65-'66= 61 15/16"
'67-'69= 62 5/16"
'70-'71= 59 3/4"
'72-'73= 64 9/16"

E BODY
'70-'74= 61 5/8"

A100
'65-'70= 61 3/4"

D100
'65-'71= 63 15/16"
'72-'74= 64 3/8"

........................................................
........................................................

Spring perch widths (center-to-center)

A BODY
'66-73= 43"

B BODY
'62-'70= 44"
'71-'74= 47.3"

C BODY
'65-'73= 46"

E BODY
'70-'74= 46"

Center of axle to center of u-joint is 12.35"

[Crazy440]

Thanks John for the info.  If I move the spring purch, I should be able to fit a 70 under a 73?

[John_Kunkel]

A tape measure will tell the tale, you have to move the perches out over 1 1/2" on each side to fit the '73 so be sure there is room for the outer U-bolt before the housing steps up in diameter.