indy dual intake

[komninon]

does the Indy dual intake fits under the hood of 68?
right now i have a performer rpm with drop base air cleaner and is very close.
i would like to build a 505ci  with ez heads in the near future.

[firefighter3931]

George, the ICH dual plane is the same height as a Performer RPM so yes it will clear a stock hood with a drop base air cleaner assembly. 

The indy DP works very well...especially when opened up to MW intake port. We tried it on my 572 and it made close to 700HP. Member Oldschool has 3 of them on 500in motors and likes the performance. 



Ron

[komninon]

thank you  Ron.

[pullrock]

I am also running the ICH Dual plane intake.  I had to run the dropped air cleaner and the hood closes without any problems.  Wish i was running this when my engine was built and put on the dyno so I could see what kind of HP's it adds compared to the Torker II, Single Plane intake. 

Eric
68 Charger R/T

[375instroke]

That's one kick ass dual plane, from what I've seen.    I'm building a Big Block Dart and am contemplating this intake with either a stroker 440, or a stroker 400 with some of those special heads that require spacers on RB motors.