68 RT for a parts car?

[Rayzor]

I found a 68 Rt 383  four speed car sittin in a cow field. The owner said I can drag it away for 500 bucks. The motor is still in place as is most of the car except the rear end. The floors are rusty and I bet the trunk is to. But what I am after is the exhaust manifolds and the rear metal tray behind the rear window. Will I burn forever for hackin up this car?

[TeeWJay426]

Check the VIN.... either the 383 isn't original, or it's not an R/T.

http://www.dodgecharger.com/forum/index.php/topic,65663.0.html

[69bronzeT5]

I wouldn't cut up a R/T. However, you sure it has a 383 or it's a R/T? The engines available on '68 R/Ts were the 440 and 426.....no 383s.

[charger_cody]

Well for 500 bucks I would say do it. Does it run? How long has it been sitting there? You could part out the rest you don't need.

Cody

[b5blue]

Get it out of there! THEN figure out just what it is. 

[Dans 68]

Get it out of there! THEN figure out just what it is. 

Agreed!!! Don't part it out until you know what it is...and we tell you to.   

If it is an original 4-speed it is rare, no matter how you cut it (pun intended).

Dan

[6bblgt]

Buy it!  Remove the exhaust manifolds.  Sell the rest on Ebay.  Make money!  Purchase AMD dutchman panel.

Question answered.  Problem solved!!

[charger_cody]

Bravo 6bblgt!!!!!!!

Took the words right out of my mouth.

Cody

[Dans 68]

Let me amend my comment. Grab the vin, fender tag and what ever else identifies the car. If it is an XP (non-R/T) '68 4-speed then you have a very rare car. If it is a XS (R/T) it is more desirable (just not as rare). Grab it, I.D. it, and post it here. Opinions will fly like fly balls to right field in Yankee stadium, but it will all be good.

The bottom line is that if it becomes your car, do what you want. Just give us the chance to dissuade you. 

Dan

[Rayzor]

It is a xs vin and the fender tag is there also. Not positive its a 383 thats just what the old man said he thought it was. I was not about to climb in a spiders nest to check. The car has been sitting were it is since about 1976 so the elements have taken there toll. I guess anything can be saved but there is alot of floor rust and one quarter is kinda rusty. I am gonna go back with a thermos of coffee and 300 and see what he has to say.

[SG1022]

It is a xs vin and the fender tag is there also. Not positive its a 383 thats just what the old man said he thought it was. I was not about to climb in a spiders nest to check. The car has been sitting were it is since about 1976 so the elements have taken there toll. I guess anything can be saved but there is alot of floor rust and one quarter is kinda rusty. I am gonna go back with a thermos of coffee and 300 and see what he has to say.

Shouldn't you be working? Nice find BTW 

[Dukes69]

It is a xs vin and the fender tag is there also. Not positive its a 383 thats just what the old man said he thought it was. I was not about to climb in a spiders nest to check. The car has been sitting were it is since about 1976 so the elements have taken there toll. I guess anything can be saved but there is alot of floor rust and one quarter is kinda rusty. I am gonna go back with a thermos of coffee and 300 and see what he has to say.

damn dude.  Its only $500, why the swindle?     

[moparnole]

I wanna see pictures.......

[Rayzor]

Not a swindle to ask, besides with a little whiskey in the coffee it makes the dealings smoother. The biggest problem is going to be getting it out of the field. I tried to drive out to it and my truck (Dodge cummins) about sank to the doors. I think five is fair because there are the parts I need, I am just having a hard time with the idea of cutting it up. I may pull some parts and sell it for enough for the rear panel. Hey SG, I am working!! ha ha ha

[tan top]

sounds like a deal !!  buy it dude , check all the numbers !! if matching , & it is a real R/T ,  would not part it  , look at all the repop  sheet metal from Amd now !!!     , can't wait to see pictures dude 

[SG1022]

Not a swindle to ask, besides with a little whiskey in the coffee it makes the dealings smoother. The biggest problem is going to be getting it out of the field. I tried to drive out to it and my truck (Dodge cummins) about sank to the doors. I think five is fair because there are the parts I need, I am just having a hard time with the idea of cutting it up.

Don't make my bring my 3500 cummins down there  

I may pull some parts and sell it for enough for the rear panel. Hey SG, I am working!! ha ha ha

oh yeah *cough cough* so am I  

[SG1022]

sounds like a deal !!  buy it dude , check all the numbers !! if matching , & it is a real R/T ,  would not part it  , look at all the repop  sheet metal from Amd now !!!     , can't wait to see pictures dude 

AMD metal costs a few bucks, and he already has a charger , not that you can ever have enough. (see -> 69charger2002)

[Rayzor]

I have no interest in doing another restoration. God knows I have almost had to sell a kidney for the bucks to finish my 68. I will see about getting some pics and details when I head up there again.

[Troy]

If it's a real R/T 4-speed it's worth a whole lot more than the parts you can get off it even if it's mostly rusty - especially if that 383 happens to really be a 440 with the matching numbers. I agree with selling the car and buying AMD replacement parts for your car (and have a pile of cash left over). Oh, and check under it for the Dana.

Troy

[rav440]

 

[RamchargerMopar]

If it's a real R/T 4-speed it's worth a whole lot more than the parts you can get off it even if it's mostly rusty - especially if that 383 happens to really be a 440 with the matching numbers. I agree with selling the car and buying AMD replacement parts for your car (and have a pile of cash left over). Oh, and check under it for the Dana.

Troy

Didnt he say the rear was gone?

[Troy]

If it's a real R/T 4-speed it's worth a whole lot more than the parts you can get off it even if it's mostly rusty - especially if that 383 happens to really be a 440 with the matching numbers. I agree with selling the car and buying AMD replacement parts for your car (and have a pile of cash left over). Oh, and check under it for the Dana.

Troy

Didnt he say the rear was gone?

Whoops! Well, I thought I read it all.

Troy

[Rayzor]

Nope no rearend or trans in the car. would be nice to score a dana. Thats another problem is how to get the car out of a pasture with no axle. I may have to go find one to bolt in and pull it with a long cable. But I am certain its a RT car as I stared at the vin. The motor is a guess at this point. I may just snatch a few things and list it for someone else to fix, and use the proceeds to fix my car. I would think that it should cover its cost and the metal out back. Its grill is all there to as a bonus. 

[Tilar]

What part of the world is this thing in?

[RCKSTR]

No pics yet?