What are the odds that Eddy Heads will work with my Hedman Headers on 440?

[Ghoste]

According to Hedman they apparently will.  Might not hurt to fire a quickie off to the Edelbrock tech line too.

[komninon]

all i did was change the retainers and locks and use their roller rocker
my car is 100% street car so the gain was more than enough.
i did not buy the Eddy's because i had  mint jet-hot coated hooker headers that would not fit.

[1Bad70Charger]

all i did was change the retainers and locks and use their roller rocker
my car is 100% street car so the gain was more than enough.
i did not buy the Eddy's because i had  mint jet-hot coated hooker headers that would not fit.

How much more $ are the roller rockers for the 440source heads? 

[komninon]

around $300 for a complete set

[Silver R/T]

good article on what fits best/worst and with which heads
http://www.moparts.org/Tech/Archive/exhaust/17.html

[Ghoste]

That's a very interesting article  I wish he would have done some actual fitting trials though as some of those headers he lists as being compatible with angled plugs are the same ones that others are reporting issues with.