will vector 15 inch 8.5 wheel fit on my 69 charger

[towscum]

i know they will fit on back will they clear on the front if i run a smaller tire, or do i need  7 inch wide rim.

[tan top]

  what back space are the wheels     , 8  & a 1/2 inch ,  is too wide , i'm thinking with stock fender wheel lip & inner brace ! also going to hit on the  rear inner frame rail at full lock    also becareful if you do get it filling , i would check the bound & rebound of the front suspension & all steering angles , as the fender lip might be too close to the tire wall & could shred the tire    , would be better with 7 or if you do some accurate measuring  with back space  & 8 inch wheel  ,  with a 235 , 245 even maybe a 255 tire , remember to measure both sides

[towscum]

8 3/4 back space i just bought 2 of them on e bay, now im bidding on 2 more that are the same, im worried that ill never find these wheels again if i dont get em.

[tan top]

 hmmm yeah i see what your saying  , also have to watch the wheel coming in contact with the upper control arm outer edge where the ball joint is screwed in  ,  although this is not so much of a problem if you going larger than a 15 inch wheel diameter ,
  some of the guys here are running a big wheels up front , perhaps they can help more  , but to me its  doubtful they are going to fit    
   

about the widest on the front  i'm thinking is a 255 on a 8 inch wheel with 4 inch back space ,( very tight , for my liking ), or 3 & 7/8"s of a inch &  use a spacer to take almost 4 " need to mesure accuratly  235 tire wouldbe better  ,  all the above what i have found , is my opinion  to be safe , not having the tire sitting  under the fender , quarter  lip & allowing the suspension full travel , 

[towscum]

thanks for your help

[General_01]

If they are old Vectors, the 8.5 rim will be fine on the front because they adjusted the backspacing. If they are the new reissued Vectors, they will not work because they kept them the same backspacing as the 7" rims.