2nd gen upper door panels from Legendary

[Ghoste]

I don't anything about the quality but it seems that Legendary Interiors are offering reproduction upper door pads for 68-70 Chargers now.
I deeply apologize if this has already been posted.

http://legendaryautointeriors.com/webmodules/pages/Detail.aspx?PageID=83

[charger_fan_4ever]

Yikes $900 a set for 70's.

[tan top]

the grain looks a spot on match to me     would be intrested in seeing a side by side comparesin with the BEA stuff , as its been said  the grain is not 100% accurate ,  

[Troy]

They've had them out for a while - at least Carlisle last year and, yes, even at the Nats Ghoste. I looked at both and neither are correct to me. BE&A is very up front about their grain not being correct. Legendary's grain looks better (they claim it's exact) but didn't want to talk about anything other than how theirs are made in the US and all others are "Taiwan junk". The Legendary pads looked too "puffy" to me - especially the character line. On the originals you can run your hand from top to bottom and it's a nice arc but the outer edges of the line are raised and the center too sunken in on the legendary pads. I thought I took a picture or two at Carlisle so I'll have to see if I can dig it up. Legendary also does not include the emblem - nor do they offer it - so keep that in mind when shopping by price.

Troy

[Ghoste]

I didn't see them at Columbus although I was over at the Legendary tent for awhile.  I was giving them the gears about not doing door panels for 66-67 Charger.  I could tell they were reeeeeeeeally taking my comments to heart too. 
But no, I didn't see them there and I'm assuming they must have been on one of their display racks and likely a prominent spot so that Mr. Observant (me) would see them.

[Troy]

Actually, they were on the table so, if it were really crowded, they be hard to see.

Troy

[Nacho-RT74]

if you ask me if grain is not 100% correct, won't be a big deal if you have to get all 4 corners... diff stuff if you have to replace just some pieces

[bull]

This is one of those things I decided to go with originals on. I don't know why but it seems there are just certain things that can't be reproduced correctly in this hobby. Speaking of which, every once in a while I buy a pair of nice original arm rests off Ebay too just for the heck of it because I've yet to see any of those being built right either.

[Ghoste]

Actually, they were on the table so, if it were really crowded, they be hard to see.

Troy

Naturally, because that of course is where Mr. Observant was talking to them.

[Nacho-RT74]

This is one of those things I decided to go with originals on. I don't know why but it seems there are just certain things that can't be reproduced correctly in this hobby.

you tell me! I'm still waiting for good plastic interior panels for 3rd gens, with the RIGHT pattern. Vinyl is maybe not that important and maybe you can overlook them but CASTED pattern on plastic is extremelly noticeable

[charger_fan_4ever]

Anyone used PG classics ?

$600 a set with medallions.

[Troy]

Anyone used PG classics ?

$600 a set with medallions.

PG Classic is the same company as BE&A.

Troy

[charger_fan_4ever]

Anyone used PG classics ?

$600 a set with medallions.

PG Classic is the same company as BE&A.

Troy

Good to know
Thanks

[BROCK]

Grain is different between 69 & 70.  68 is same as 69 or no??