News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

where do these bolts go on the rear window?

Started by Finn, December 20, 2009, 08:44:29 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Finn

December 20, 2009, 08:44:29 PM
I don't see where they attach to the car  :shruggy:


Also, is the part the blue arrow points at being reproduced? I only have one for the drivers side. Thanks in advanced guys!
1968 Dodge Charger 440, EFI, AirRide suspension
1970 Dodge Challenger RT/SE 383 magnum
1963 Plymouth Savoy 225 with a 3 on the tree.
2002 Dodge Ram 5.9L 360
2014 Dodge Dart 2.4L

Roth68rt

#1
December 20, 2009, 09:27:58 PM
Those bolts are what hold the glass to the track, and I don't believe that bracket is being reproduced. 
Steve

69charger440

#2
December 20, 2009, 10:09:48 PM
My bolts broke!!! CAN I HAVE THOSE ONE!!!!??! YOU DONT NEED THEM!! :smilielol: Yeah, they hold the glass in!  :2thumbs:
1969 Charger 540 Blown Hemi 1000HP, 69 Road Runner 500 Stroker 665 HP

Finn

#3
December 20, 2009, 11:13:50 PM
Ohhhh that makes sense!  :cheers:
Quote from: 69charger440 on December 20, 2009, 10:09:48 PM
My bolts broke!!! CAN I HAVE THOSE ONE!!!!??! YOU DONT NEED THEM!! :smilielol: Yeah, they hold the glass in!  :2thumbs:
Haha 2 of mine broke too! Ill keep an eye out for more originals but Ill probably just get aftermarket ones that work from a hardware store if possible. In that case you can have the two of mine that are still good. :2thumbs:
1968 Dodge Charger 440, EFI, AirRide suspension
1970 Dodge Challenger RT/SE 383 magnum
1963 Plymouth Savoy 225 with a 3 on the tree.
2002 Dodge Ram 5.9L 360
2014 Dodge Dart 2.4L

69charger440

#4
December 20, 2009, 11:28:16 PM
Let me know if you find some at a hardware store!! My charger is getting new metal welded on so I can't get a bolt at the moment to compare them!!
1969 Charger 540 Blown Hemi 1000HP, 69 Road Runner 500 Stroker 665 HP

Corellian Corvette

#5
January 11, 2010, 06:37:48 PM
They always break. Drill and re-thread, and use stainless bolts and fender washers. You can even get the rubber washers at your local small HW store. Then you don't have to worry about them rusting.

john108

#6
January 28, 2010, 12:59:36 AM
From my '68 Charger.

gtx6970

#7
January 28, 2010, 11:21:05 AM
More than likely , it's just a 1/4-20 with a large free spinning captive washer
Print
Go Up Pages1
User actions