News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Power Brake Booster & Reinforcement Plate

Started by mike337, December 18, 2009, 11:42:42 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

mike337

December 18, 2009, 11:42:42 AM
I found the reinforcement plate I needed, purchased a new booster & master cylinder from MP Brakes.  Just went to start assembly and found that the rubber diaphram over the end of the booster will not go through the circular hole in the reinforcement plate without some effort.

I don't want to tear the brand new piece of rubber, so need to ask: Is it supposed to be that tight of fit?

Mike
Print
Go Up Pages1
User actions