News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

tach wire into second gen

Started by Nacho-RT74, December 14, 2009, 09:08:55 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Nacho-RT74

December 14, 2009, 09:08:55 PM
is this wire taped together with the engine harness or does run separatelly but parallel to the engine harness ?
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

A383Wing

#1
December 14, 2009, 09:16:56 PM
I think it's separate....the tach was an option....they would not make 2 different engine harness's for each engine..

(I think)

Nacho-RT74

#2
December 14, 2009, 09:23:50 PM
yeah thats what I think specially being out of the maing bulkhead plug, but just to be sure...

however on 71/73 Chargers, there are a cavity for it on engine harness. Dunno either how it should be on these LOL. 74 uses the only cavity left empty on tranny harness plug. Dunno either on these LOL
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

268RTs4ME

#3
December 17, 2009, 10:45:37 AM
It runs by itself along with taped up harness, see pic, that it is where yellow tape is on it. Mine is a tan wire.
Print
Go Up Pages1
User actions