help on skid plate

[billssuperbird]

  did a superbird come with a skid plate on the k-frame. and what does it look like.

[b5blue]

On eBay # 220505829779

[billssuperbird]

thanks for your help.

[A383Wing]

I have a company up here that reproduces them if needed

[billssuperbird]

what is the price+shipping. let me know when you get time.

[62 Max]

Here also,a little more money.


http://www.tonysparts.com/SearchResults.asp

[A383Wing]

what is the price+shipping. let me know when you get time.

Not sure on the price..you will have to contact Bob at ACME http://www.superbirdbob.com/new_products.htm

[mauve66]

i didn't see any bolts holes, how do they attach and i assume its for the engine oil pan??  i've been worrying about my extra deep tranny pan and was thinking of having something in front of it to help protect it from speed bumps

[billssuperbird]

i would like to know what holds it on to the k-frame

[68X426]

I could use some info on the design also. Got my 68 Hemi RR with a custom Charlies oil pan. How adaptable are these plates, how to mount? Let's keep this topic going, thanks.

[b5blue]

Welded.....it won't cover the bottom of the oil pan, it protects it from the front I believe.

[billssuperbird]

go to page 15 to see the 70 superbird that corndogecharge did.then go to page 15 to see the picture

[472 R/T SE]

I don't know how well this stuff works personally but have heard a lot about it.  Panel bond.

Slap some on the skid plate & put the floor jack under it & put some pressure on it. 

Just an idea. 

[8WHEELER]

I have a couple ACME K-frame skid plates, One is on my red charger ''bottom pic'' I am running
the Hemi pan, the skid plate I run is a 1in drop. Its hard to see in the picture because the
skid plate is powder coated, but it hangs down a good inch lower than the pan.

The other two pics are the same skid plate, it is welded on, as you can see. The steel
is much thicker than the stock mold, and does lot look OEM, but very efficient.

Dan