Cam Timing question?

[68r/t]

I have a question  that I hope someone can assist me with,  I am putting my 440 together  which has 9.4-1 comp, pocket ported and cleaned up 342 heads, ch4b intake manifold, 750 vac Holley,HP exhaust manifolds, currently got 3.23 rear end and looking at swapping in a 3.55 and is auto.
The cam I got is a Crower HDP282 and has  228 and 236 @ 050, 478 and 504 lift, 112deg lobe separation.  Crower say install  @ 108deg intake,  I am thinking of installing it @106 to lower the rpm range slightly.
I,m interested to see what you guys would do.

Thanks