Does any one know the stall speed for the 11 inch coverter?

[69rrgrabber]

 :laugh:Just discovered the site here and love it!  Don't know how I missed it.  I'm restoring a 69 Charger R/T ( took ten years to find) and am at the point of choosing a cam/converter. Does any one know the stall speed for the 11 inch converter that came with the 69 Charger RT?  It is the 440 magnum and I was going to upgrade the cam to the 60303 voodoo cam or very similar.  The car has a 3.55 dana and 275/60 tires in back.

Thanks!
CAC

[John_Kunkel]

 
A '69 440 would have come with a 12" converter (actually 11.75"), the chart below shows the '69 stall speed specs.

[69rrgrabber]

 :cheers:Thanks for the reply.  I guess that I need to figure out where this converter came from.  It is just like the 11 inch converter I have in my 69 Road Runner, 383 motor so I figured that it was stock. 

Thanks
CAC

[69charger440]

dont know about the converter, but that is a good cam  Had it in my 440 also. Isnt afraid to spin the tires at all!!   

-CAUTION: Beware of tire wear. Check wallet for tire money!!! 

[John_Kunkel]

The stall speed chart below is for '75 when the 440 did come with the smaller converter.

[69rrgrabber]

  John thanks for the charts, I'll put a copy of each in my binder.  It is interesting that they would have a higher stall converter in a 1975 440 then the 1969 But that converter should be a good match for that 303 Voodoo cam. 

Hey 69Charger440, can you tell me more about your set up.  I'd really like to be able to lay rubber w/o powerbreaking and get close to 450HP and 550 Torque.

Thanks,
CAC

[69charger440]

Well I had a 440 with that lunati cam in it! I had rebuild 516 close chamber heads. And freshly rebuilt transmission! (cant remember what they did to it)  It also had a 750 holley, 10in converter, with a 4:10 posi in the rear! Not sure of the horse power but it would lay down some rubber?!! 

That is after my father (IDAHOGRUMPYBEAR) rebuilt the carb for me!    Thanks! DAD!!

I never took it to the track. Actually I have yet to register the charger!!  But it is a cheap engine to build. Might not be the fastest but still a great time!