Pictures of rear wheelwell lip/ & trunk wiring clamps required.

[mopar_nut_440_6]

Hello,

I was hoping some of you would be able to provide some pictures of the rear wheel well lip on a 2nd gen. The car has aftermarket 1/4's installed and the lips are quite wide. I placed the trim up against the 1/4 and used them as a template but want to make sure I get this as close as possible prior to paint.

I am sure they do not fit flush with the trim all the way around and I am looking to get the factory look.

I also need to fabricate the 3 wiring retainers which are in the LH  side of the trunk. A close up pic and some measurements would be helpful.

Thanks in advance for your help.

James