trunk floor to fuel pipe seal

[roger440]

Are these repos any good? Anyone used them?  Y1, jims etc seem to have them, 2 sizes even!

Why are there 2 sizes?

[mike337]

Just getting ready to install mine.  Had to stop because I can't find my vent tube that attaches to the filler pipe.  I bought a repo from YO, laid it side by side with the original one, and it is the same size, contour, and general appearance as the original.

It is YO part # A0708.

Hope that helps.

Mike

[roger440]

Just getting ready to install mine.  Had to stop because I can't find my vent tube that attaches to the filler pipe.  I bought a repo from YO, laid it side by side with the original one, and it is the same size, contour, and general appearance as the original.

It is YO part # A0708.

Hope that helps.

Mike

excellent, thanks

[The70RT]

Got mine from yearone, no problem.

[tan top]

Got mine from yearone, no problem.

yep me too 

[roger440]

Cool, better get my order in

[8WHEELER]

When I called YO they only stocked one size for 68-70. Many 68's have a pipe seal that is more narrow
than the 69 and 70's. I have called other vender's and they no longer have the more narrow unit.

The wider version will work with the new trunk pans, but I did not need a new pan on one of
my cars, so I used the original seal.

Dan

[8WHEELER]

The top pic is the one YO sell's ''late 68-70,  Part part # A0708. the next one down is an original 68.

Now if YO, or anybody knows of some outfit that sells the narrow seal, please let me know.

I have to admit the picture above looks like the narrow seal. But I have not been able to get one.

Dan

[roger440]

Jims auto parts list both.

[tan top]

oh jims does both ,  if its any help Roger , my charger had a SPD of november the 22nd 68 & had the larger one originaly

[8WHEELER]

Jims auto parts list both.

Thanks, I have never ordered from them, but that will end   

Dan

[tan top]

... please delete