Valve cover bracket

[Sixt8Chrgr]

Can someone tell me what this bracket holds that is attached to the valve cover. This is on my 68 383 4bbl.

Thanks,

[Ghoste]

Looks like a plug wire bracket to me.

[Sixt8Chrgr]

That is what I was thinking too. Do you know where I can see a diagram that shows the proper routing for the plug wires? I would like to replace the wires and put them where they are suppose to go.

Thanks,

[b5blue]

I think there is a plastic "holder" that clips on that.

[68r/t]

I think that cover is off a C body, I bought a pair of 68 C body covers and one of them had that bracket while my friends B body covers do not.

[Sixt8Chrgr]

Very well could be. I am trying to get a hold of a diagram showing the correct spark plug wiring. I think that would help me to determine what I have.

Thanks,

[gtx6970]

Spark plug wire clip bracket - valve cover is off a C-body without HP exhaust

[Sixt8Chrgr]

Spark plug wire clip bracket - valve cover is off a C-body without HP exhaust

OK thanks

[b5blue]

Looks like you have a C body motor in there.

[histoy]

I believe that there is a white plastic or nylon piece that clips around the individual wire, and then it slips into the groove in the bracket.   There would be one of them for each wire that fastens into this style of bracket.   The plastic piece is available at most Mopar parts suppliers.