440 more power

[westcoastdodge]

is 500 streetable horsepower dooable using ported 906 heads,what else would be needed,carb,inlet manifold,cam suggestions 
compression ratio

[Kryp2nitE]

http://www.moparts.org/Tech/Archive/bb/4.html

the engine build up is:
9.9cr, forged pistons
ported 346's with 2.14/1.81
stamped HD rockers with adj. pushrods
torker II
850 holley(900 cfm)
big headers
old DC292 cam(new MP one is better)
deep pan w/ hemi pick up
decked, squared, balanced, rod bolts, etc.
electronic dist, 17 initial, 36 total
here are the numbers:
rpm.....tq/hp
4000...456/347
4100...478/372
4200...499/399
4300...506/414
4400...512/429
4500...510/437
4600...510/447
4700...508/454
4800...508/464
4900...505/471
5000...497/473
5100...497/482
5200...489/484
5300...483/488
5400...480/494
5500...474/497
5600...466/497
5700...457/496
5800...450/497
5900...448/503
6000...439/502
6100...432/501
6200...421/497
6300...410/492
the right street/strip solid cam would be worth about 25hp, and the roller i was running (.650 lift)was worth 60hp+.

[westcoastdodge]

cheers Kryp2nitE just what im looking for