News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

68/69 Charger Headlight Vacuum Acuatotrs!

Started by 69 Charger 500 Fanatic, October 31, 2009, 09:41:53 PM

Previous topic - Next topic

69 Charger 500 Fanatic

Can anyone tell me define the following 68/69 Charger headlight actuator part numbers please?

2889883 & 2926961

Thanks!!

Ghoste

As near as I can tell one is a 68 number and the other is a 69 number for the same actuator (although that 68 book has two numbers for two different length actuator rods)?
There must be some difference but I don't seem to be seeing it. :shruggy:

69 Charger 500 Fanatic

Thanks!  I have two of the 2889883 & four of the 2926961 but cannot remember which came from what grille assembly.

Jeff.

Ghoste

My books show the 288's as being 1968 and the 2926 ones as being for 1969.

69 Charger 500 Fanatic

Good enough!  Thank you....I appreciate the help!

Jeff.

nascarxx29

The wing braces are indeed Daytona,............as far as the canisters, PN#2889883 is a 1968 PN#,.............2926961 is a 1969 PN#,.........the air grabber canisters start with a 3  PN# series,.......................you could use the 68 canisters, however the "magnet" (yes there is a magnet inside!),......is rather large, takes a lot of vacumm to pop up the lites,...........the 69 canisters have a 50% reduction in the magnet base,....may have been a factory change to lessen the amount of vacumm required to opperate a lite door assy......the 6961 PN is the only canister used on Daytona/ Superbird applications,.....................

 This is from a wing car post about actuators
1969 R4 Daytona XX29L9B410772
1970 EV2 Superbird RM23UOA174597
1970 FY1 Superbird RM23UOA166242
1970 EV2 Superbird RM23VOA179697
1968 426 Road Runner RM21J8A134509
1970 Coronet RT WS23UOA224126
1970 Daytona Clone XP29GOG178701