door lock problems, please help!

[trevor74]

so i am finaly putting everything back together on 1974 charger and the doors were taken apart and hte person who did it before me screwed up all the door lock linkage, the clips are broke for the rods and the clips on the back of the lock cylinder are gone, the locks are good and everything i was just wondering if anyone knew where i could get the linkage and clips and everything. thanks

trevor

[Nacho-RT74]

plastic clips are available around anywhere... if nobody post before me, will do later.

there are left hand and right hand clips

[E5 Charger]

Search for this on ebay Item number: 270315569810

[400/6/PAC]

I just put mine togather recentaly.
I got new clips from the parts store.
The linkage on My passanger door was bent but I had extra doors to pull another one.
I still have some linkage if You need one.
Good luck

[AZMoparboy]

Hi Guys,

I'm just trying to put together the 73 charger still and needing help with small parts in the doors. This time I'm looking for the lock rod clips that go on the lock cylinder down to the latch mechanism. This rod is an 1/8th inch rod, all of the other rods that are in the door are 5/32th. NAPA only has the large ones, auto zone has only the large. Does Chrysler still carry them? These little clips are aways breaking, someone must sale them. Asking for help again

[FLG]

I have all the rods and clips needed. I'll check when i go to the shop tomorrow. Driver or passenger?

[TylerCharger69]

You can usually find them in the help section at most auto parts stores