News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

I need bolt sizes

Started by ZSmithersCharges, October 18, 2009, 04:11:59 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

ZSmithersCharges

October 18, 2009, 04:11:59 PM
I need starter bolt and nut size.
I need carberater nut and bolt size.
And need to know a good place to get a cheap 4 barrel carb.

This should get the car running, I will post vids if this happens, thanks.  Also, almost lit Charger on fire due to the negative battery terminal wire being colored red, realized wires were crossed when it started smoking  :brickwall:
Luckily nothing was damaged.

John_Kunkel

#1
October 18, 2009, 04:23:49 PM

The starter takes one bolt on the top and one stud/nut on the bottom.

Top bolt is 7/16"-14 X 1 1/2" long. Bottom stud is 7/16" X 2" long.

Carb nuts/bolts are 5/16". Threads in manifold are coarse, nuts are fine.
Pardon me but my karma just ran over your dogma.

ZSmithersCharges

#2
October 18, 2009, 04:29:53 PM
Quote from: John_Kunkel on October 18, 2009, 04:23:49 PM

The starter takes one bolt on the top and one stud/nut on the bottom.

Top bolt is 7/16"-14 X 1 1/2" long. Bottom stud is 7/16" X 2" long.

Carb nuts/bolts are 5/16". Threads in manifold are coarse, nuts are fine.

Thank you your a life saver  :cheers:
Print
Go Up Pages1
User actions