440 Source = Distributor Rotor =

[Nacho-RT74]

the only wrong with MP dist is that they need to be checked good.

reluctor points are frequently not at same height, and gap changes from rest to vacuum position. I had to mill a little bit some points to get same gap on every point... then also bend a little bit the pick up coil bracket to get the best gap posible on both positions.

Then also numer one doesn't meet with stock number one, its about 90º off. Not really a problem if you are aware off

at the end what I meant is they are not PLUG AND PLAY distributors and needs some touchs.

to save those headaches, there are better options around