News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Aftermarket axles should I upgrade?

Started by greenpigs, October 15, 2009, 08:14:53 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

greenpigs

October 15, 2009, 08:14:53 PM
I will be running 295-50-15 on 15 by 10 draglites next sping. I have a 4:10 richmond gear and stock axles. A few years from now I plan on putting a stronger 440 in. I was thinking of mark williams rifle drilled shafts with 3 inch studs. Should I go for it or save my money?
1969 Charger RT


Living Chevy free

firefighter3931

#1
October 15, 2009, 09:37:48 PM
The stock axles are fine with a street tire and auto trans....save your money.  :Twocents:



Ron
68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore ignition  authorized dealer ; contact me with your needs

speedfreak68

#2
October 15, 2009, 11:37:14 PM
not to hijack the thread... but what about with a 315 drag radial?

Blown70

#3
October 15, 2009, 11:47:26 PM
Well, I hate to go against Ron... I personally believe in upgrading esp if you will up the hp down the road.... if you are like most people that HP number will climb up and up....Just my thoughts.... never know when you decide to put a drag tire on there.... :shruggy:

For what you are speaking about now... I would certainly say your fine, for sure.... just my  :Twocents:
Print
Go Up Pages1
User actions