Where Does This 68 Charger Quarter Window Part Fit?

[Needa68]

I've done it again! The quarter windows are back in our Charger but I have parts left over. Three years ago when I removed everything I took pictures, notes and bagged all parts. Unfortunately, the part in the attached picture was not photographed or its original location noted. Today, I can't figure out where it fits.

I know one of these rubber parts goes somewhere in either the area surrounding each quarter window or on the quarter window mechanism. I know this because I had one in the bagged parts for each window. It appears the part was held in place with body putty. Each is 1 inch long with a 5/16 inch hole in its center.

If you know where this part fits I'd appreciate it if you'd let me know. Thanks, RHM,Jr.

[bull]

It looks to me like something a deep sea diver pulled off the bottom of Pearl Harbor but maybe have a look at these pics to see if you can pick it out. It might be the rubber piece that surrounded the glass mounting bolt??

[Belgium R/T -68]

I just did my Q-windows and I didn't have anything looking like that?

Per

[tan top]

nope thats nothing from a second generation   had my 69 to bits also , seen nothing like that

[Needa68]

Thanks to all for trying to help me with this!

I hate to do it but since I can't figure out where the parts fit and since the windows work properly I'll just hold onto the ugly spuds. Maybe someday I'll have a moment of clarity and remember from where I removed them.

RHM,Jr.