Trunkdivider install

[Belgium R/T -68]

Anybody have a picture how the divider is looking like installed? I never had one before so.......

Per

[Rolling_Thunder]

it just hangs on the same hooks that the rear seat hangs on...    sorry no pic       

I am running a chunk of plywood painted black & coated with dynamat - i think it works a little better than the stock cardboard one.

[Hemidog]

if you bought a new one from legendary like I did, just poke through those holes, and hang it on the hooks for the back seat, DONE!

[Just 6T9 CHGR]

Dont forget the 2 small retainers that are held in with phillips head screws at the top

[y3chargerrt]

Everybody forgets those chris..

[Belgium R/T -68]

Dont forget the 2 small retainers that are held in with phillips head screws at the top

Don't follow here.

Per

[Hemidog]

Dont forget the 2 small retainers that are held in with phillips head screws at the top

Don't follow here.

Per

I think he's talking about these:
http://cgi.ebay.com/ebaymotors/68-69-70-Roadrunner-Charger-Coronet-GTX-Package-Tray_W0QQcmdZViewItemQQhashZitem53dd21e43bQQitemZ360192271419QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

I don't have them on my car.

[b5blue]

  12.49+3.50 shipping!!!!!! Plus you need 2 correct screws! 

[Belgium R/T -68]

12.49+3.50 shipping!!!!!! Plus you need 2 correct screws! 

Double that with customsfee. I think I will make some myself but thanks anyway Hemidog.

Per

[Hemidog]

12.49+3.50 shipping!!!!!! Plus you need 2 correct screws! 

Double that with customsfee. I think I will make some myself but thanks anyway Hemidog.

Per

How is the custom fees in Belgium? If the package has less value than 200 NOK ($33 atm)in Norway, there is no tax. Everything above that is 25% tax, plus a ridiculous handling fee!  the limit hasn't changed since the 70s, even with inflation and upped prices.

It's infuriating 

Marius

[68r/t]

You guys in Europe have got it bad,  here in Australia I can get $1000 AU "about $900 US"  worth of parts including shipping  with no duties after that it is 10% gst plus import duties around 18% total.
So I make sure all my parts are under a $1000 and I am good to go.

[Belgium R/T -68]

Everything under 100$ is free of dutys except for a 10€ admin cost. Then it starts, 21% on value including shippingcost and 6%
on value alone. Customsfee is 50€ so in that respect combined shipping is better. Without some friends that can repack/reinvoice
it wouldn't work financially if you do a resto. Best way is ofcourse to buy a car over there and fill it with parts.

Per

[squeakfinder]

 
I made mine and the package tray out of fiber board. Cut with a jig saw, I just followed the pattern of the old ones. (What was left of them.)

[dodgecharger72]

it just hangs on the same hooks that the rear seat hangs on...    sorry no pic       

I am running a chunk of plywood painted black & coated with dynamat - i think it works a little better than the stock cardboard one.

I've got the same setup in my car. Cut a piece of plywood, put black wood primer on it, two cans of rubberized undercoat, and dynamat. It looks pretty good and blocks out road noise better than the stock one.