hood mounted turn signals

[steveca]

anybody know what kind of voltage I should see to the hood mounted turn signals (at the wire junction under the hood) on a 69 Charger in order for them to do their thing?  I assume it should be 12 volts but I'm only getting 3-4 to one and 6 to the other with no response from either bulb?  And if my assumption is correct, what should I be checking to fix the problem (of no turn sigs on the hood - they work fine front and back)?   thanks in advance

[Chryco Psycho]

there must be some resistance in the connector , the hoodlights use 12v bulbs & operate on 12v

[Spartan]

I took a little steel wool and sandpaper to take the rust and crud off the connections both inside and outside the bulb housing.  After doing that, both mine started working again. 

One thing I noticed when I replaced my yellow lenses with repros the holes for the pegs were undersized and cracked when I tried to push them on.  I don't know if they were purposely undersized or just the set I had but I will have to replace mine again.  If you are doing that, keep that in mind as well.