News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Dual Quads

Started by Charger 1, October 19, 2009, 11:50:28 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Charger 1

October 19, 2009, 11:50:28 AM
I getting ready to install an Edlebrock CH28 Dual Quad intake with two Edelbrock 600s on my '69 Charger with a 440.  My question is what air filter assembly can I use that will clear the stock hood?  I don't want to cut the hood.  What are you guys using?

Charger 1

#1
October 21, 2009, 07:59:43 AM
Anyone?????????????????

elacruze

#2
October 21, 2009, 09:10:50 AM
I'm installing a CH-28 with holley throttle body injection, but the car's only just about ready for paint. I hadn't sussed out the air cleaner yet myself but just by looking at the manifold and comparing to my M1 I think just about any reasonable air cleaner should fit. The Edelbrock is considerably lower than the single-plane M1.
1968 505" EFI 4-speed
1968 D200 Camper Special, 318/2bbl/4spd/4.10
---
Torque converters are for construction equipment.

elacruze

#3
October 21, 2009, 10:03:32 AM
Oops double post.  :eek2:
1968 505" EFI 4-speed
1968 D200 Camper Special, 318/2bbl/4spd/4.10
---
Torque converters are for construction equipment.

frederick

#4
October 21, 2009, 10:49:31 AM
I've read on another board about people using this with dual quads:
http://www.summitracing.com/parts/EDL-41193/
Not sure if it fits though.

A383Wing

#6
October 23, 2009, 09:10:37 PM
made my own baseplate...use stock Fram CA127 filter under a stock top...air enters under the stock top like the little 273-4bbl air cleaners on the Darts.
Print
Go Up Pages1
User actions