linkage question

[1charger69]

gettin her put all together after years of being apart.....i have an edlebrock TM6 intake and a 750 cfm eldebrock carb.....standard kickdown bar and throttle cable i will be using......what brackets,  springs etc do i need to correctly make this operational once again.

[John_Kunkel]

The first thing you'll need is the Mopar throttle lever extension for the Edelbrock carb (Edelbrock #1481). The aftermarket manifold might prevent the use of the factory throttle cable clamp and linkage, check the page in the link below for pictures of common linkage installations.

http://www.moparts.org/Tech/Archive/auto/35.html

[1charger69]

thanks john..thats a BIG help!

[NHCharger]

You still might have to do a little modifying to get everything to work properly.