News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

charger 68 convertion into automatic pistol grip looking

Started by nelson_audet, September 21, 2009, 12:03:12 PM

Previous topic - Next topic
Print
Go Down Pages1 2 All
User actions

nelson_audet

September 21, 2009, 12:03:12 PM
hi

i would like to know if i can buy a kit for convert my charger 68  original floor auto shifter into a 4 speed looking shifter pistol grip.

i want to buy a complete convert kit into pistol grip automatic, where i can buy it ? it is possible to do it???

thanks for your help
69 Charger RT 440 4 SPD 4.10 Dana car B5 blue

moparstuart

#1
September 21, 2009, 12:30:32 PM
http://www.duncan-motor-sports.com/3.html

 duncan is where i got mine



   here it is in the birdible , with my flamed maple grip from south america
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

nelson_audet

#2
September 21, 2009, 01:38:24 PM
ok but you have a e body style shifter curved with front...

i want a b body looking pistol grip like 1970.. with a long shifter.... it is possible to have it?



69 Charger RT 440 4 SPD 4.10 Dana car B5 blue

moparstuart

#3
September 21, 2009, 01:58:51 PM
Quote from: nelson_audet on September 21, 2009, 01:38:24 PM
ok but you have a e body style shifter curved with front...

i want a b body looking pistol grip like 1970.. with a long shifter.... it is possible to have it?




I have never seen anything like that , if you find one i would love to have one also ?  maybe call duncan and see if he can make you  one ????

GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

Rolling_Thunder

#4
September 21, 2009, 02:17:42 PM
it can be done...    ratcheting style shifter mounted inside the console and use a 4-speed top plate...    then attach a stock pistol grip handle to it somehow
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

nelson_audet

#5
September 21, 2009, 02:23:54 PM
i want this looking

69 Charger RT 440 4 SPD 4.10 Dana car B5 blue

moparstuart

#6
September 21, 2009, 02:40:08 PM
 that is the same as mine it's just not in park ,  bad angle of my picture .  Once mine it in drive it looks the same as that picture .

GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

nelson_audet

#7
September 21, 2009, 02:42:38 PM
not the same looking.. check the rod... it is not the same....

send a zoomed picture of your shifter..... perhaps i dont look good on your picture... if you have a closer picture send it please...
69 Charger RT 440 4 SPD 4.10 Dana car B5 blue

moparstuart

#8
September 21, 2009, 02:46:39 PM
Quote from: nelson_audet on September 21, 2009, 02:42:38 PM
not the same looking.. check the rod... it is not the same....

send a zoomed picture of your shifter..... perhaps i dont look good on your picture... if you have a closer picture send it please...
I dont at this time
    I guess call and ask him if he has two different one ,  When i ordered mine that is the only one he made to fit a b body  ?  
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

nelson_audet

#9
September 21, 2009, 02:50:06 PM
Quote from: moparstuart on September 21, 2009, 02:46:39 PM
Quote from: nelson_audet on September 21, 2009, 02:42:38 PM
not the same looking.. check the rod... it is not the same....

send a zoomed picture of your shifter..... perhaps i dont look good on your picture... if you have a closer picture send it please...
I dont at this time
    I guess call and ask him if he has two different one ,  When i ordered mine that is the only one he made to fit a b body  ?  


ok but check the picture... the rod have not the same size...  you rod look like a E body.... anyway i have asked to duncan a couple of question....
69 Charger RT 440 4 SPD 4.10 Dana car B5 blue

nelson_audet

#10
September 21, 2009, 02:55:18 PM
why i must change the shift R gate, why the original is not ok with this shifter?

thx
69 Charger RT 440 4 SPD 4.10 Dana car B5 blue

moparstuart

#11
September 21, 2009, 03:20:43 PM
Quote from: nelson_audet on September 21, 2009, 02:55:18 PM
why i must change the shift R gate, why the original is not ok with this shifter?

thx
it took me awhile to break the gate in . it also took me awhile to get used to it .  You wont have the button on top to release it so you really do need to goto the shifter R gate style . you  pushes the whole shifter down or pull it up to change gears instead of pushing a button .
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

Hemidog

#12
September 21, 2009, 03:24:59 PM
I got the one in the picture, after some breaking in, it works great!
Except, I can't get it into to 1st  :scratchchin:

moparstuart

#13
September 21, 2009, 04:02:37 PM
Quote from: Hemidog on September 21, 2009, 03:24:59 PM
I got the one in the picture, after some breaking in, it works great!
Except, I can't get it into to 1st  :scratchchin:

mine goes back into 1st fine but as you stated it did take some breaking in .  Just takes alittle loosening up now it works fine .
   Moderator NOT Just 6T9 CHGR  chris has it on his 69 but he has the reverse shift pattern style .
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

nelson_audet

#14
September 21, 2009, 05:09:19 PM
kkk
69 Charger RT 440 4 SPD 4.10 Dana car B5 blue

69charger2002

#15
September 21, 2009, 05:14:35 PM
i used one from a company called shift-r-arm. It looks identical to the one you are asking about/wanting. it was $125 if i remember right and i had him special make the grips in chrome. i know there is a small ad in mopar collector's guide with their info.
i live in CHARGERLAND.. visitors welcome. 166 total, 7 still around      

http://charger01foster.tripod.com/

472 R/T SE

#16
September 21, 2009, 05:41:59 PM
Quote from: 69charger2002 on September 21, 2009, 05:14:35 PM
i used one from a company called shift-r-arm. It looks identical to the one you are asking about/wanting. it was $125 if i remember right and i had him special make the grips in chrome. i know there is a small ad in mopar collector's guide with their info.


Same outfit

Just 6T9 CHGR

#17
September 21, 2009, 07:30:02 PM
I was the test mule for Tom and his reverse pattern shift-r-gate.  I had him make it to my specifications and it works great!  No more missed second gear!  :drive:

I am using it with the stock shifter though
Chris' '69 Charger R/T

elacruze

#18
September 22, 2009, 08:24:01 AM
Quote from: nelson_audet on September 21, 2009, 05:09:19 PM
kkk

LOL maybe it's just me but I wouldn't post 'kkk' next to a 'General Lee' avatar.   :hah:
1968 505" EFI 4-speed
1968 D200 Camper Special, 318/2bbl/4spd/4.10
---
Torque converters are for construction equipment.

Hemidog

#19
September 22, 2009, 08:40:37 AM
Here's some pics of my handle, and why I can't get it into 1st  :brickwall:

nelson_audet

#20
September 22, 2009, 08:54:37 AM
Quote from: elacruze on September 22, 2009, 08:24:01 AM
Quote from: nelson_audet on September 21, 2009, 05:09:19 PM
kkk

LOL maybe it's just me but I wouldn't post 'kkk' next to a 'General Lee' avatar.   :hah:


LOL i have not thinked about it when i have writed it LOL
69 Charger RT 440 4 SPD 4.10 Dana car B5 blue

Just 6T9 CHGR

#21
September 22, 2009, 11:51:14 AM
Quote from: Hemidog on September 22, 2009, 08:40:37 AM
Here's some pics of my handle, and why I can't get it into 1st  :brickwall:

Have you asked Tom why the handle hits the bezel??
Chris' '69 Charger R/T

Hemidog

#22
September 22, 2009, 12:02:23 PM
Quote from: NOT Just 6T9 CHGR on September 22, 2009, 11:51:14 AM
Quote from: Hemidog on September 22, 2009, 08:40:37 AM
Here's some pics of my handle, and why I can't get it into 1st  :brickwall:

Have you asked Tom why the handle hits the bezel??

No, He already sent me two handles, because the first one hit the ashtray, so when I got the other one, I got frustrated, and gave up.
I will send him an e-mail and ask him now.

moparstuart

#23
September 22, 2009, 03:32:25 PM
Quote from: Hemidog on September 22, 2009, 12:02:23 PM
Quote from: NOT Just 6T9 CHGR on September 22, 2009, 11:51:14 AM
Quote from: Hemidog on September 22, 2009, 08:40:37 AM
Here's some pics of my handle, and why I can't get it into 1st  :brickwall:

Have you asked Tom why the handle hits the bezel??

No, He already sent me two handles, because the first one hit the ashtray, so when I got the other one, I got frustrated, and gave up.
I will send him an e-mail and ask him now.

MINE DOES HIT THE ASH TRAY , i THINK I WILL EMAIL HIM TO AND GET YOUR STYLE   i DONT REALLY NEED MINE TO  GO INTO 1ST
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

Hemidog

#24
September 22, 2009, 04:02:56 PM
So that's why you've angeled it, I was wondering about that.


I mailed him:
"Try raising the shifter bracket up slightly in the rear. You can use washers that were in the kit or any washer. raise it up about 1/8 inch or a little more. "

I'm gonna try that tomorrow.
Print
Go Up Pages1 2 All
User actions