News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Rear End Backing Plates

Started by TylerCharger69, September 08, 2009, 08:05:56 PM

Previous topic - Next topic

TylerCharger69

I have a '69 rear housing and I was able to acquire brake backing plates from a '73.  They fit fine, but my question is....will I have to get '73 brake hardware and drums?  And....could someone possibly post a pic showing the differences between the two if there are any???    Thanks All........Ace

y3chargerrt

The wheel cylinders are different from 69 to 70.

TylerCharger69

Okay.....but....I understand I will need to get the cylinders for a 73.......I need to know what the differences are in the backing plates themselves.........

Rolling_Thunder

none that  i know of...     :Twocents:
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

TylerCharger69