News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1968 Charger Head Light Door Push Nut Retainers

Started by Needa68, August 31, 2009, 03:46:09 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Needa68

August 31, 2009, 03:46:09 PM
We're finishing up the grill for our 68 Charger but am missing 3 of the 4 push nut retainers that keep the doors on the studs the doors pivot on. Anyone got a sources for these push nut retainers.

Thanks, RHM,Jr.
Drive fast, make the light.

The Mitchell & Mitchell 1968 Dodge Restorations

http://www.68dodgerestorations.com

jaak

#1
August 31, 2009, 04:04:16 PM
Go to Autozone or any part store and look in the HELP! section.... you know got all the special fasteners, window handles, fittings, etc. You can get a pack with assorted sizes, thats where I got mine.

Jason

Needa68

#2
August 31, 2009, 04:25:39 PM
Thanks Jason! I've been to NAPA and O'Reilly's but not Auto Zone. Will make a stop there tomorrow.

RHM,Jr.
Drive fast, make the light.

The Mitchell & Mitchell 1968 Dodge Restorations

http://www.68dodgerestorations.com

gasoline_24

#3
August 31, 2009, 05:10:55 PM
Try Ace Hardware in the plastic containers that is where I got mine.

Needa68

#4
August 31, 2009, 07:01:10 PM
We don't have an Ace Hardware in our small berg. If Auto Zone is a bust I try some surronding towns and look in both stores.

Thanks, RHM,Jr.
Drive fast, make the light.

The Mitchell & Mitchell 1968 Dodge Restorations

http://www.68dodgerestorations.com

dkn1997

#5
August 31, 2009, 09:05:10 PM
I drilled out the little studs and put cotter pins through them.  works perfect and I don't really care about correct....
RECHRGED

69*F5*SE

#6
September 01, 2009, 04:29:01 AM
Push nut retainers???  Got a pic?  I'd like to know what they are.  Really.   :shruggy:

Needa68

#7
September 01, 2009, 08:27:17 AM
This push nut retainer fits a 1/4 inch stud. The center hole is approximately 3/16 inch. From edge to edge it measures 7/16 inch.

RHM,Jr.
Drive fast, make the light.

The Mitchell & Mitchell 1968 Dodge Restorations

http://www.68dodgerestorations.com

Needa68

#8
September 01, 2009, 11:43:37 AM
Quote from: jaak on August 31, 2009, 04:04:16 PM
Go to Autozone or any part store and look in the HELP! section.... you know got all the special fasteners, window handles, fittings, etc. You can get a pack with assorted sizes, thats where I got mine.

Jason

Good call on AutoZone! Found them where you said they would be. They are manufactured by Dorman, Part # 13411 and as you said they are part of their "Help" parts line. Web site is: www.dormanproducts.com

Thanks!
Drive fast, make the light.

The Mitchell & Mitchell 1968 Dodge Restorations

http://www.68dodgerestorations.com

69*F5*SE

#9
September 01, 2009, 12:59:25 PM
Thanks for the pic and info.   :2thumbs:

jaak

#10
September 01, 2009, 04:01:06 PM
Quote from: Needa68 on September 01, 2009, 11:43:37 AM
Quote from: jaak on August 31, 2009, 04:04:16 PM
Go to Autozone or any part store and look in the HELP! section.... you know got all the special fasteners, window handles, fittings, etc. You can get a pack with assorted sizes, thats where I got mine.

Jason

Good call on AutoZone! Found them where you said they would be. They are manufactured by Dorman, Part # 13411 and as you said they are part of their "Help" parts line. Web site is: www.dormanproducts.com

Thanks!

:2thumbs: Good deal man! I thought it was a Dorman part but wasn't sure.

Jason
Print
Go Up Pages1
User actions