426 Hemi Fuel Pump Fuel Line

[boys3rt]

Does anybody know of any vendors that reproduce the discharge fuel line that goes from the fuel pump to the vapor separator / fuel filter on a 426 Hemi?  If you bolt the filter to the fuel pump flange as designed the tubing has quite a bend that I cannot match. Earlier the only way I could make my bent tube work was not to bolt the filter as designed and leave floating supported by the short hoses. Would anyone out there have a picture or some type of drawing? Any help would be appreciated.

[Back N Black]

Here is a couple of pics in the link below, i bought my from a on line vender, i try and track it down later.

http://www.dodgecharger.com/forum/index.php/topic,56313.0.html