440 finally proceeding

[AmadeusCharger500]

I am going to need some help putting together this thing.
It started 6 months ago and the darn thing is still in progress.
Anyway it is at a shop. They are looking it over and doing the decking/honing and balancing. I need to get pistons and would like to get the speedpro 2335-6pack. I just want to order the correct ones. The engine is bored .030. I assume the F30=4.35 is the correct but want to check with the experts here.
Thanks
HH

[Charger72SE]

Hi HH,

I just put the 2355 6 pack pistons in my 440 HP.  Summit had the best price at $42.95/each  the part number is TRW-L2355F30 for 30 over.  I also used the SpeedPro Moly rings SLP-E-424K030 at $64.69 for the set.  You can verify everything with the people when you order them.

the free shipping in the Midwest is nice, too!

this weekend I'm putting everything back together and will fire it up next week

good luck!

[AmadeusCharger500]

Thanks 72Se- That was helpful.
Any thoughts on a set of rod and main bearings.
I need cam bearings and freeze plugs too. Should I get all these separate, or do they come in any form of a set?
HH

[Chryco Psycho]

if you are bored to .030 the 2355 in 4.35 size is correct
Get Clevite / Michigan 77 full groove mains & rod & cam brgs , Speed Pro Plasma moly ring set 

[Charger72SE]

yep, what he said