'69 Charger Drip Rail Padding

[Rustymuscle]

Hey guys, I kinda screwed up here...

After getting my '69 Charger back from paint, I've been cleaning and buffing all of my brightwork before installation. Before I cleaned up my drip rails, I noticed bits of the factory foam padding was flaking off. Without thinking, I scraped it all off. Do any of you guys know where I can get some of this adhesive-backed padding? Does 3M make anything like this? Any online stores have anything like this?

Any input can help,
Kevin

[69bronzeT5]

Drip rail padding?

[Rustymuscle]

Man, I knew I should've taken a couple pictures.

Below the drip rail, there is a long single piece (if its not a drip rail, what do you call it, officially? A molding?) that runs the entire length of the side windows. At its top is a thin strip of adhesive-backed foam padding. I need to replace this stuff.

[Blown70]

Man, I knew I should've taken a couple pictures.

Below the drip rail, there is a long single piece (if its not a drip rail, what do you call it, officially? A molding?) that runs the entire length of the side windows. At its top is a thin strip of adhesive-backed foam padding. I need to replace this stuff.

  Has a few screw to hold it in,,, I think just some single density foam pad............  That is if I kno what your talking about there...... Goes on the roof where the window rolls up?

[Rustymuscle]

Yeah, that's it. I believe the weatherstripping snaps up into it. Does the dang thing have a name? I'm on Year One's site and they don't have it anywhere.

[69bronzeT5]

Man, I knew I should've taken a couple pictures.

Below the drip rail, there is a long single piece (if its not a drip rail, what do you call it, officially? A molding?) that runs the entire length of the side windows. At its top is a thin strip of adhesive-backed foam padding. I need to replace this stuff.

Oh okay!!! I know what your talking about.

[Rolling_Thunder]

i got mine from E-bay - dont remember the exact company but it is just 1/8" foam that is free...    I then used some 3M super adhesive to attach it to the moulding.

[Rustymuscle]

eBay, huh? What do I search for? 1969 Dodge Charger window trim foam strip?

[Just 6T9 CHGR]

The correct name for these are "roof rail weatherstrips"

http://cgi.ebay.com/ebaymotors/1968-1969-1970-Charger-Coronet-Roof-Rail-Weatherstrip_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem5ad057d2c6QQitemZ390042473158QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

PS---pick this one up while you are there as well  

http://cgi.ebay.com/ebaymotors/1969-DODGE-SERVICE-MANUAL-CHARGER-CORONET-DART-HEMI_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem19b5d9d475QQitemZ110425134197QQptZMotorsQ5fManualsQ5fLiterature

[NMike]

are you asking about a light foam backingon the trim itself?

[Rustymuscle]

are you asking about a light foam backing on the trim itself?

Ding, ding, ding! Give the man a cigar! Yes, that's what I'm looking for!

[Blown70]

are you asking about a light foam backing on the trim itself?

Ding, ding, ding! Give the man a cigar! Yes, that's what I'm looking for!

hardware store....I think personally dont know else where.

[oestermarken]

Bought mine from Rick Kreuziger (RestoRick)

Here you go..

http://www.restorick.com/proddetail.asp?prod=RoofRailSeal

/Brian

[Blown70]

Bought mine from Rick Kreuziger (RestoRick)

Here you go..

http://www.restorick.com/proddetail.asp?prod=RoofRailSeal

/Brian

SWEET thanks good to know you can get it from a shop.

[69*F5*SE]

I don't remember removing anything like that when I stripped my car down.  Lets see some pics of it in place.  I'm lost.

[Blown70]

I don't remember removing anything like that when I stripped my car down.  Lets see some pics of it in place.  I'm lost.

Did you look at the pic on ricks site?  Some people do not remove that part from a car.  It goes where the window rolls up into or on top of that trip part..... ITs there, unless someone had taken it out before you.

[Rustymuscle]

Bought mine from Rick Kreuziger (RestoRick)

Here you go..

http://www.restorick.com/proddetail.asp?prod=RoofRailSeal

/Brian

Brian, thanks for the link! I just bought mine.

This is why I love this site!
-Kevin

[69*F5*SE]

I don't remember removing anything like that when I stripped my car down.  Lets see some pics of it in place.  I'm lost.

Did you look at the pic on ricks site?  Some people do not remove that part from a car.  It goes where the window rolls up into or on top of that trip part..... ITs there, unless someone had taken it out before you.

I figured it out now.  It took a little while but, I got it now.   Thanks    Although, that trim piece on my driver's side is cracked in half at the bend where the top of the vent window would rest.   

[gasoline_24]

That is the correct stuff, but I do not believe it has adhesive.  The stuff I bought didn't anyway.  It does just hold on with the screws.

[oestermarken]

Ricks Seal has adhesive, just like the original 

/Brian

[yeahitsgotahemi!]

These guys carry them.

http://shop.detroitmuscletechnologies.com/main.sc

I bought the whole paint seal kit. Nice quality, had stuff that the softseal kits didn't have, namely those drip rail foam gaskets.

[bill440rt]

I think I just used some foam strip seal available at the local hardware store. Like foam window seal or something.

I don't remember removing anything like that when I stripped my car down.  Lets see some pics of it in place.  I'm lost.

Did you look at the pic on ricks site?  Some people do not remove that part from a car.  It goes where the window rolls up into or on top of that trip part..... ITs there, unless someone had taken it out before you.

69*F5*SE - Let me know if you need this trim. I have an extra pair in good shape. PM me if you need it!

I figured it out now.  It took a little while but, I got it now.   Thanks    Although, that trim piece on my driver's side is cracked in half at the bend where the top of the vent window would rest.   

[Shakey]

Ricks Seal has adhesive, just like the original 

/Brian

Correct, the original has adhesive and it's brutal to get off the weatherstrip channels!   

[69*F5*SE]

bill440rt , you have a PM.   

[oestermarken]

Ricks Seal has adhesive, just like the original 

/Brian

Correct, the original has adhesive and it's brutal to get off the weatherstrip channels!