Which studs do the wing braces attach to.

[oldcarnut]

I want to weld in my Bird Clone wing brace trunk tabs today but I lost my ref pictures.  May seem like a stupid question but counting from the wing front back to the bumper, which studs do the braces bolt too?  1 & 3 or 2 & 4?  I wasn't able to find any pics showing up under the qtr--just looking down at the trunk floor but it looks like 2 & 4 to me.  Thanks
****edit****Got it.  Should have messed with it first before I asked. 

[nascarxx29]

These references might help

http://wwnboa.org/daytdetails.htm

http://www.dodgecharger.com/forum/index.php/topic,32916.0.html

[oldcarnut]

Thanks, i saw those on the other post.  Unless it was the camera view, most of the forward Daytona Braces I saw looked to be straight up perpindicular to the trunk floor.  What pics I could find on the Bird brace seemed like the forward brace was on a slight angle coming off the trunk tab.  Anyway mine are welded in now so the RR gets to sport the wing full time now instead of the wing resting on the back room floor and tape over empty holes in the qtrs  .

[A383Wing]

Mine...may not be much help...my supports only have 3 studs anyway

[hotrod98]

Mine looks kind of like this.

[oldcarnut]

Thanks for the pics guys  .  I hope I got it close.