Mufflerchoise

[TexasStroker]

Agreed...better overall performance from the X-Pipe.  The X-Pipe best equalizes the exhaust and subsequently has an improved scavenging impact, which is where the power comes from 

Basically think of it as an improved design on the factory type "crossover" or H-pipe.  Common sense would dictate that the "X" design is going to flow better than the more cumbersome and restrictive "H" design which typically installas at a 90 degree angle to the head pipes.  The "X" takes the same concept and applies technologial advancements.  The sound is toned down a little, but some prefer that...For everyone else there are the power gains that justify the drop in DBs, lol.

[Foreman72]

well i was gonna get the tti kit with the h pipe cuz it was cheaper but man with all this chatter...am i gonna feel the h vs x difference in the seat?

[TexasStroker]

Here is some real world test data from this past weekend...Just stumbled on it, so figured I'd post up:

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=5411262&an=0&page=0&gonew=1#UNREAD

[mauve66]

earlier someone was asking for sound clips of various mufflers and most of them are on their respective sites if your still interested

www.dynomax.com
www.flowmastermufflers.com

i didn't notice a sound clip on borla but that doesn't mean its not there
i tried to put in 1968 dodge (thats as far back as it would go) for a recommended muffler but they said they didn't have a part number for that vehicle

www.borla.com

[c00nhunterjoe]

i dont care for the sound clips that they give on the sites. i feel they are not accurate.

here is the latest video of my car with the origonal 40 series flowmaster's in 3 inch diameter. the video is taken with all 4 windows down in the car. shifts were at 6500 rpm and kicking it out of gear at 5000 in 4th. i think the video's will show that the flowmaster's dont make your car sound like a mustang and they are not "tinny"

http://www.youtube.com/watch?v=IqkLPXXrohw

[Foreman72]

i dont care for the sound clips that they give on the sites. i feel they are not accurate.

i've always thought the same thing...it varies so much by motor and whatnot....but i suppose its a baseline...

[c00nhunterjoe]

well my new exhasut came in today, stay tuned- hopefully i will get it installed tomarrow- 3 inch all the way out the rear mated to 50 series suv flowmasters

[Purple440]

I don't like the higher pitched droning sound of my flowmaster 50's and will be replacing them at some point.   I want that low natural rumble that a big block should sound like.

- Doug

[Belgium R/T -68]

Well this was the outcome on this thread for my part, now I can hang the complete TTI system up.

Per

[lisiecki1]

anxiously awaiting sound clips per 

[Belgium R/T -68]

anxiously awaiting sound clips per 

I surely will make a video and put it in my strokerthread.

Per

[Purple440]

Can't wait for that! 

[firefighter3931]

Good choice Per !  I had mine out the other night at a local cruise in and got lots of positive comments on the exhaust tone. I have an x-pipe and Ultraflows just like you're installing. No drone cruising down the road and a nice rumble at idle. They really Bark at WOT as well ! 


Ron

[mopar0166]

i just saved 50 bucks on my dynomax ultra flos with the rebate being offered cant beat that deal 

[Nacho-RT74]

I went for these, hoping will be similar to the ultraflows ( they look to be same design and also SS )

http://www.flowmonster.com/stainlessseries.aspx

and saved some bucks ( allmost half of price )... hoping will be fine

I got them even cheaper from an ebay seller

[71runner]

has anyone used or heard the hooker max flows?? id really like to know what they sound like

[68 CHARGER R/T]

i dont care for the sound clips that they give on the sites. i feel they are not accurate.

here is the latest video of my car with the origonal 40 series flowmaster's in 3 inch diameter. the video is taken with all 4 windows down in the car. shifts were at 6500 rpm and kicking it out of gear at 5000 in 4th. i think the video's will show that the flowmaster's dont make your car sound like a mustang and they are not "tinny"

http://www.youtube.com/watch?v=IqkLPXXrohw

like c00nhunterjoe  said, they dont make your charger sound like a mustang because i got flows on both of mine and yes  i own a mustang .

first one with the charger and second clip with the mustang
http://www.youtube.com/watch?v=uGhoBWVrXYU

http://www.youtube.com/user/BLAZNHOT97#p/a/u/1/C99HUfAgWnk

[grdprx]

i just saved 50 bucks on my dynomax ultra flos with the rebate being offered cant beat that deal 

Dude!  Where'd you find a Dynomax rebate?   I need a set of Ultra Flo's!

[mopar0166]

i saw it on jegs, and if you go to there website you can find the same , they are about 82 dollars and with 25 off its a good deal

[Cooter]

i dont care for the sound clips that they give on the sites. i feel they are not accurate.

here is the latest video of my car with the origonal 40 series flowmaster's in 3 inch diameter. the video is taken with all 4 windows down in the car. shifts were at 6500 rpm and kicking it out of gear at 5000 in 4th. i think the video's will show that the flowmaster's dont make your car sound like a mustang and they are not "tinny"

http://www.youtube.com/watch?v=IqkLPXXrohw

Finally, a YouTube Clip of a straight drive where someone actually puts some R's on the motor instead of that "Short shifting" BS..Good on 'ya CoonhunterJoe..

[grdprx]

i saw it on jegs, and if you go to there website you can find the same , they are about 82 dollars and with 25 off its a good deal

Sweet!  I'm ordering up a set!  Was hoping I'd get them for my birthday, but saving $50 is even beter! (Cuz you know the $ comes outta my pocket, even if the wife buys it for me...) 

[Nacho-RT74]

i saw it on jegs, and if you go to there website you can find the same , they are about 82 dollars and with 25 off its a good deal

DAMN!!! I didn't know that!

[mopar0166]

yeah i was still on the fence about buying them untill i saw the rebate

[grdprx]

I found it, looks like it's a manufacturer's rebate, started 3/1/10-8/31/10.  Do you got a particular part #, mopar0166? 

[NorwayCharger]

I run Flowmaster 40 and i like the sound of it outside the car.
Only thing i don´t like is the rumble inside the car at 1800-2000 rpm....
I found this :
http://www.mustang50magazine.com/techarticles/m5lp_0212_ford_mustang_muffler_comparison_test/index.html