News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

miloden oil pan gasket?

Started by 68chargerboy, July 29, 2009, 09:53:22 PM

Previous topic - Next topic

68chargerboy

has any one used their crush proof gasket thats made of composite? i am goin to try mine out tomorrow and im wondering if i should use any sealer on it as well? thanks

Zach

Hot_Rodder

To be on the safe side, I would put a little sealer on it, after all, what could the sealer hurt? As for have I used there gasket, can't say that I have.

tan top

would always use sealer if it was me  :yesnod:
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

62 Max

If you use the Fel-Pro #1808, the only sealer you need is at the rear main seal retainer and block mating surface and same for timing cover.With or without windage tray they won't leak as long as your pan rails are straight.