Pushrod end selection

[frederick]

Hi,

I am about to order some pushrods from smithbros.
Now I noticed they need to know which type of end ball/cup to fit.
Does anyone know which type I need for a 383 with hydraulic lifters and stock stamped rockers.
Pushrods are going to be 3/8".




Thanks
Frederick

[b5blue]

Just tell them "stock" but do you know the exact length for each one?

[John_Kunkel]

With stock lifters and stock stamped rockers you need 5/16" ball ends on both ends like B, F, G, H in the 3/8" chart.

[frederick]

Hi guys,

I am going to measure them all this week.
I know the valve stem heights are not all the same height on my heads, hopefully there won't be to much difference between them.
Thanks John that is a big help.

Frederick