Which studs on the front? Changing out the RH threads...

[Wakko]

I posted this on the '70 site and got some good answers.  The front left hub was not converted to standard thread (but the rear was, go figure) and when I went to the auto store they had a bunch of different ones to choose from.   Almost all of them had to be ordered and I don't feel like leaving my car on jackstands at my buddy's house for a few days waiting for them to arrive (he's got the impact wrench).  Any way to know what's on there prior to pulling it apart?  I guess I could pull just one stud, but I'd really rather not.   Original big block car with manual brakes, 11" on the rear (unknown on the front).   

[BrianShaughnessy]

Most times,  front rotors come with the RH studs already installed.

Take that front drum crap and either toss it into a dumpster or sell it off on ebay to somebody building a trailer queen 

[ChargerRob]

Disc conversion is the only way to go.

[Wakko]

I don't have the money for that right now.  I still have a bad radiator, no gauges, no seatbelts, bad shifter and seats that are so low I feel like I'm Mexican.

[bull]

They're half inch but I don't remember the thread pitch. I replaced the studs on the LR of my '68 not too long ago and I just went to the parts store and asked for studs to fit the RR.

[ChargerRob]

Nothing wrong with being a Mexican Wakko. You just need to know how to do it right.
   \/
     |
     |     
     |
     |
     |
     |     
     |
     |
     |
     |
     V

[PocketThunder]

I don't have the money for that right now.   I still have a bad radiator, no gauges, no seatbelts, bad shifter and seats that are so low I feel like I'm Mexican.

On my 68 the fronts are both RH and the rear driver side is the only LH.

Radiator...$170   http://store.summitracing.com/default.asp?Ntt=radiators&Ntk=KeywordSearch&DDS=1&searchinresults=false&N=0&target=egnsearch.asp&x=21&y=7

Guages... $5   try this trick from allpar http://www.allpar.com/history/mopar/electrical2.html    and more good reading  http://www.allpar.com/history/mopar/electrical.html

Seat belts and seats....$??  you can try a set of these  http://www.corvairkid.com/sebring.htm  they look out of place though. 

Shifter.....  i'm still looking.....

[Wakko]

lol...I know how much the stuff costs, and I don't have it.      I bought a pair of Stewart Warner guages but my factory cluster is sitting on my floor waiting to be "restored" and seats are PRICEY.  Gonna definitely be waiting a while for that. 

[Shakey]

Hey Wakko, sounds like it's time to shake down some drug dealers for some spending money.