Suspension Vendors- PST vs. Just Suspension or......

[parkerswede]

I am looking for a complete front end rebuild kit for my 1972 Dodge Charger Rallye. Who's the best - I have catalogs from PST and Just Suspension. Are theygood or is someone else better? Thanks.

[moparguy01]

I would not use the PST kit. i bought one from them, and they sent the wrong tie rod ends, and didnt send the shells for the bushings, so i had to buy some replacement rubber ones and push the rubber bushings out to get the freaking shells.

After this i found out they are owned by Kanter Auto parts, who is also on my shit list for terrible service and never being able to get a single order right to save there damn lives.

[Chryco Psycho]

just get an Energy suspension poly bushing kit & get Moog ball joints & tie rod ends  from a local supplier

[ChargerBill]

Neil is probably right on this one...Energy Suspension is supposed to be good stuff. I personally ordered from PST, but what I found out after talking to Just Suspension is that they ALSO sell the Poly suspension stuff (same as PST) but cannot legally call it that because PST copyrighted that term. I had no problem dealing with PST, but then, I haven't installed mine yet, so who knows what could happen. Personally, if it's between PST and Just Suspension, I'd buy from Just Suspension. The owner seems like a good guy and I also believe that they are Mopar guys too...or so I've heard. Also, it chaps my hyde when someone copyrights a common term and gains an advantage over their competitors just because of semantics...kind of like the whole Bloomington Gold "SURVIVOR" catastrophe....a bunch of BS.

[parkerswede]

Thanks guys. Called Mancini and ordered a complete front end rebuild kit. Do the torsion bars need to be replaced? I don't think there are any issues with them so far. (Its a 1972 Charger Rallye). Has front and rear stabilizer package.

[8WHEELER]

Any car of this age could use a new set of bars, It depends on amount of use on the car
and the way it was used. I put new bars in everytime I put in a all new susp kit like you are doing.
Al tho this is not always needed, but with its age I would do it.

Dan

[68ChargerJMP]

Firm Feel.......They are a quality place. I ordered some tubular a arms and a stage 2 gearbox and I am very impressed with the quality and service. Great products.

[yellowcuda]

Same problem here with PST, they sent the complete wrong torsion bars.  We ended up going with Mopar Performance like on our first car and they have worked out great.