Should this cluth fork work in my 70?

[carolina charger]

 Doesn't seem right to me, I can't get the arms to go behind the throw out bearing. It would come closer to working if the arms didn't have quite as much bend in them. I'm using a 440 and a 833.

[MadScientist]

My brother had the same problem not too long ago. After looking at my fork in my 70 he realized that his was probably out of an E-body.  Not sure if its correct, but his was definitely not completely around the bearing

[John_Kunkel]

Measure the overall length of the fork and visit Brewer's site, they show the applications for the various forks.

http://www.brewersperformance.com/products.asp?id=102

[carolina charger]

 The one I have is 10 7/8". The same as some of them Brewers shows. The degrees of offsets and angles is whats wrong with mine.