News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1969 Body Bumper Locations

Started by Rustymuscle, June 25, 2009, 07:46:44 PM

Previous topic - Next topic

Rustymuscle



Hey guys, in a fit of idiocy, I purchased a complete body bumper kit but failed to actually find out where each rubber stopper goes. Does anyone have a map?
1969 Dodge Charger R/T, 535ci Wedge, 727 w/ GV, Dana 60
1970 Dodge Super Bee
2004 Jeep Grand Cherokee 4x4
2005 Dodge Ram 1500 SLT HEMI

Shakey

I am pretty sure that someone has created it and posted it here on this site.

If you find it, post a link please!

CornDogsCharger

let see here.... starting from the upper left.... the first two round ones go on front of the fenders.  The go over the head of the phillips hood adjuster bumper.  The next four go on the top edge of the fenders between the fender and hood.  The next row.The first four I'm not really sure about.  Maybe the underside of the trunklid.    The next two (four total, two on row 2 and two on row 3) go on the upper and lower edge of the door.  These got right above and below the latch on the door.  On row three... I can remember but the tiny ones either go on the ash tray or on the glove box.  The next two on row three go on the very back edge of the fenders and support the back corner of the hood.  The two smaller round ones in the middle of row three, I can't remember where they go... I've seen them before though.  On row five... the tiny ones are either the ash tray or glove box and the two other round ones with long tails go behind the license plate.

Hope this helps.
Justin
"CornDog"
1966 Dodge Charger
1969 Dodge Charger (DMCL Project)
1969 Dodge Charger (WB General Lee "GL#004")
1969 Dodge Super Bee